Description
Reviews
| Brand | - |
| Category | Root / Office Equipment, Supplies & Services |
| Origin | - |
| Compatible Printer Series | Bambu Lab P1P, P1S |
| Nozzle Material | Hardened Steel |
| Available Diameters | 0.4mm, 0.6mm, 0.8mm |
| Thread Type | M6 Thread |
| Maximum Temperature | 300°C |
| Best For Filaments | Abrasive materials (Carbon Fiber, Glass Fiber) |
| Package Contents | 3 Nozzles (one of each size) |
| Coating | None (Raw Hardened Steel) |
| Country of Origin | China |
| Item Weight | 15 grams |
Anonymous
Mar 23, 2026
Rating: 4/5
Solid upgrade
Works exactly as expected. The hardened steel handles glass-filled nylon without wearing down. Only giving 4 stars because they take a bit longer to heat up than the stock brass nozzles, but it's negligible.
Anonymous
Mar 20, 2026
Rating: 5/5
Perfect fit for P1S
Installation was straightforward on my P1S. The M6 threading fits perfectly without any cross-threading issues. Highly recommend keeping a set of these on hand if you experiment with different materials.
Anonymous
Mar 18, 2026
Rating: 4/5
Good durability, slightly slower flow
These nozzles are very durable against abrasive filaments. I did notice a slight reduction in flow rate compared to brass when printing at high speeds, but adjusting the flow ratio in the slicer fixed it immediately.
Anonymous
Mar 18, 2026
Rating: 5/5
No more frequent replacements
I used to change my nozzle every few weeks due to abrasion. Since switching to this kit, I haven't had to replace a single nozzle. The initial cost is higher, but it saves money in the long run.
Anonymous
Mar 11, 2026
Rating: 5/5
Essential for carbon fiber prints
Switched to these hardened steel nozzles specifically for printing with CF-PLA. The brass nozzle wore out in two prints, but these have been going strong for months. Print quality remains sharp and consistent.
Anonymous
Mar 03, 2026
Rating: 5/5
Great value kit
Getting all three sizes in one pack is convenient. The 0.6mm nozzle has become my go-to for structural parts where layer adhesion is more important than fine detail. No clogging issues so far.
Q: What is the maximum temperature these nozzles can withstand?
A: These hardened steel nozzles are rated for temperatures up to 300°C, making them suitable for most engineering filaments available for the P1 series.
Q: Can I use these nozzles with standard PLA filament?
A: Yes, you can use them with standard PLA. However, brass nozzles offer slightly better thermal conductivity for non-abrasive filaments. These are best reserved for abrasive materials like carbon fiber or glow-in-the-dark filaments.
Q: Do I need to recalibrate my printer after changing the nozzle size?
A: Yes, whenever you change the nozzle diameter, you must update the printer profile in Bambu Studio to match the new size and run the flow calibration process for optimal results.
Q: Are these nozzles compatible with the X1 Carbon printer?
A: No, this kit is specifically designed for the Bambu Lab P1 Series (P1P and P1S). The X1 series uses a different hotend assembly configuration.
Q: How do I remove a stuck nozzle safely?
A: Heat the hotend to 200°C, then use the provided wrench to unscrew the nozzle while the heatblock is supported. Avoid forcing it when cold to prevent damage to the heater block threads.
Commercial Roast Duck Warmer Display Cabinet, Countertop Heating Unit for Crispy Pork Belly, Roast Meat, and Goose
$444.50
Variable Frequency Drive 7.5KW Brand New Original
$2,312.00
Inverted Water Dispenser Stand for Pure Water, Office Drinking Water Rack, Convenience Store and Supermarket Shelf
$116.79
RSL Electric Guitar Series by Rockschool - ABRSM Edition 2018 Update, Grades 0-8 Complete 9-Volume Set
$30.00
Handmade Soap and Baking Cake Silicone Mold - Round 6-Cavity
$16.50
Meile Childhood Sponge Stamp Set - Kids' Paint Printing Tools with Sponge Brushes for Kindergarten Art
$14.30
2019 Jiangxi Isuzu Ruimai Lingtuo DMAX - Brand New Original Thickened Wear-Resistant Tires
$302.80
Pirelli P7 Run-Flat Tires 225 245 255 275 35 40 45 50 R17 18 19 20 21
$340.00
Lint-Free Industrial Wiping Cloth - Oil-Removing Absorbent Paper for Car Paint Wax and Grease Removal
$123.00
Henkel Loctite 495 Adhesive Genuine 401 406 416 460 496 Instant Glue Strong Industrial Adhesive for Metal and Plastic
$6.00
Industrial Ultrasonic Emulsification and Dispersion System - Anti-Foam Vibration for Pipeline Inner Wall Cleaning
$31,250.00
Commercial Small Electric Food Warmer Display Case for Fried Chicken, Burgers, Pies, Egg Tarts, and Youtiao - Constant Temperature Heating Cabinet for Breakfast
$623.00
Universal Triangular Stand for Mineral Water Bottles – Inverted Dispenser Rack for Water Coolers and Bottled Water Extraction
$5.10
Manufacturer Supply By-Product Cleaning Equipment, Fully Automatic Cylindrical Pig Tripe Degreaser and Cleaner for Cattle and Sheep Stomachs
$1,600.00
CANDLE.LAB | DIY Aromatherapy Candle Supplies, Natural Refined White Beeswax Pellets, Handmade Soap Materials #27
$9.00
![No-Shave Hair Transplant by Yongxiang Dean Team [Premium Customization], Unlimited Graft Count, Pain Management for Transplant Area](https://www.gosteppe.com/cache/small/product/269234/legacy-main-b28b879c33f1fe08b5eba226.webp)
No-Shave Hair Transplant by Yongxiang Dean Team [Premium Customization], Unlimited Graft Count, Pain Management for Transplant Area
$200,000.00
Kitchen Sink Drainage Mat - Sloped Countertop Drying Pad with Foldable Narrow Edges, Faucet Splash Guard, Storage Mat
$3.57
UE5 Unreal Engine 5.2-5.7 Physical Assembly System Physics Plugin
$0.50
![[Damai Holds Micro-Needle Hair Transplant Patent] Female Hairline | Non-Shaven Transplant 1000 Units | Forehead](https://www.gosteppe.com/cache/small/product/269231/legacy-main-b004541637d9aaa9d8c19288.webp)
[Damai Holds Micro-Needle Hair Transplant Patent] Female Hairline | Non-Shaven Transplant 1000 Units | Forehead
$17,000.00
Air Baffle for ABB ACS550-X2 R8 IP21 VFD
$3,450.00
Outdoor Waterproof Shockproof EDC Storage Box, Sealed Gear Case for Small Items
$5.10
Zhizhi Lin Zexu Small Regular Script Diamond Character Card Kaishu Copybook Porcelain Blue Gold Characters Brush Calligraphy Practice Folding Card
$68.00
Maotaizi Dual-Tip Dual-Color Glitter Markers for Kids - Non-Toxic Soft Tip Colored Pens for Elementary Art
$16.90
Tire Removal Socket Wrench and Spare Tire Tool Kit for Zhengzhou Nissan Paladin, Aoting, and Dongfeng Ruiqi Pickup Trucks
$16.90
Zhimo Ke Xingkai Technique Calligraphy Copybook - Upgraded Edition with Text, Images, and Video Tutorials for Beginners
$30.60
Small-Scale Yogurt Processing Production Line, Blended Yogurt Fermentation Equipment, Organic Milk Filling Machine
$115,920.00
Compact Manual Hot Stamping Machine for Logos, Business Cards, Leather Wallets, Plastic, and Wood - Heat Embossing and Branding Tool
$500.76
DIY Handmade Soap Mold – Single Square Silicone Mold for Homemade Soap
$1.96
Wall-Mounted Facial Towel Dispenser Transparent Upside-Down Design
$4.50
Colorful Ground Thread Inserts 16ER/IR1.0/2.0/3.0/3.5 ISO AG55/60 for High-Hardness Quenched Steel
$19.80
![[Lawyer's AI New Partner] DingTalk A1 Legal Edition AI Smart Voice Recorder Analysis Translation Card](https://www.gosteppe.com/cache/medium/product/210126/legacy-main-7b7dc5a93c8519defae1c408.png)
