Attributes

Brand	-
Category	Root / Office Equipment, Supplies & Services
Origin	-
Material	Hardened Steel
Compatible Series	Bambu Lab P1P, P1S, X1, X1C, X1E
Nozzle Diameters Available	0.4mm, 0.6mm, 0.8mm
Thread Type	M6 Thread
Max Temperature	300°C (572°F)
Recommended Filaments	PLA, PETG, ABS, ASA, Carbon Fiber, Glass Fiber
Package Contents	1x Hardened Steel Nozzle, 1x Cleaning Needle
Durability	High wear resistance for abrasive materials
Installation Tool	Requires 7mm wrench (included with printer)
Warranty	90-Day Manufacturer Warranty

6 reviews

Anonymous

Mar 22, 2026

Rating: 5/5

Perfect fit for X1C

Ordered the 0.6mm version to speed up some large vase mode prints. It dropped right into my X1C hotend without any issues. Flow rate is excellent and layer adhesion is strong. Will definitely buy the 0.8mm next.

Anonymous

Mar 20, 2026

Rating: 5/5

Essential for carbon fiber printing

I switched to this hardened steel nozzle specifically to print with CF-PLA and it works flawlessly. The standard brass nozzle wore out after just two spools, but this one shows no signs of degradation after ten spools. Highly recommended for anyone using abrasive filaments.

Anonymous

Mar 19, 2026

Rating: 5/5

Best upgrade for the price

For the cost, this is the best upgrade you can make to your Bambu printer if you plan on experimenting with different materials. It gives me peace of mind knowing I won't ruin my hotend trying a new abrasive filament.

Anonymous

Mar 10, 2026

Rating: 4/5

Great quality, slightly tricky install

The nozzle itself is top-notch quality and prints are very consistent. I took off one star because getting the old nozzle out required a bit more heat and force than I expected. Once installed though, it's been perfect for my P1S.

Anonymous

Mar 08, 2026

Rating: 3/5

Good but requires higher temps

The nozzle is durable, but I noticed I had to increase my printing temperature by about 5-10 degrees compared to brass to get the same flow. Not a dealbreaker, but something to keep in mind when dialing in your profiles.

Anonymous

Mar 05, 2026

Rating: 5/5

Solved my clogging issues

I was experiencing frequent clogs with glow-in-the-dark filament using the stock nozzle. Since upgrading to this hardened steel version, I haven't had a single clog. The internal surface seems much smoother and more resistant to buildup.

5 FAQ

Q: Do I need to recalibrate my flow rate after installing this?

A: Yes, it is highly recommended to run the flow rate calibration in the printer settings after changing nozzles, especially when switching from brass to hardened steel, as the thermal conductivity differs slightly.

Q: Can I use this with PLA at standard temperatures?

A: Absolutely. While hardened steel nozzles are great for abrasive materials, they work perfectly fine with standard PLA, PETG, and ABS at their normal printing temperatures.

Q: Does this come with a replacement heater block?

A: No, this package includes only the hardened steel nozzle and a cleaning needle. The heater block and thermistor are not included and are not required for installation if your current block is in good condition.

Q: Is this nozzle compatible with the original Prusa MK3S?

A: No, this nozzle is specifically designed with an M6 thread and geometry for Bambu Lab P1 and X1 series printers. It is not compatible with Prusa MK3S or other brands without significant modification.

Q: What is the difference between the 0.4mm and 0.6mm versions?

A: The number refers to the diameter of the hole. A 0.4mm nozzle provides higher detail and finer layers, while a 0.6mm nozzle allows for faster printing speeds and stronger parts due to thicker extrusion lines.

Explore your interests

Xiaomi Official Flagship, Compatible with T200/T200C, Mijia Sonic Electric Toothbrush Heads, 3-Pack

$39.00

3D Printer DIY Accessories 6*20 Single-End Electric Heating Tube 50W High-Power High-Temperature Heating Rod Single-End 24V

$30.00

Leji 3D Printer Bambu Lab High-Conductivity GD900 Thermal Grease for Hotend, Throat Tube, and Heatsink

$7.60

HP Type-C Dual Interface USB Flash Drive - Phone Backup Tool for Computers, Large Capacity for iPhone 15/16/17

$79.90

VORON 0.1/2.4 Print Head Replacement Dragon Nozzle E3D V6 Hot End Upgrade DIY

$52.91

FANMU MP3 Player for Students - Dedicated English Listening Device for High Schoolers, Bluetooth MP4 Music Player

$179.00

Fanmu MP4 with WiFi Internet Access, MP5 for High School Students, Dedicated MP3 Portable Music Player, Magical Device for Listening to Songs, MP9

$199.00

ND Ceramic Heating Block Brass Hardened Steel Nozzle High-Speed Printing Hotend

$90.54

3D Printer Accessories Hotend Ring Heating Ceramic Heater Aluminum Block V6/Volcano Quick-Heat Sheet Kit

$96.00

3D Printer Hotend Carbon Ceramic Dual-Metal Nozzle with Hardened Steel Tip

$30.00

3D Printer Hotend Heating Assembly for H2D

$169.00

League of Legends LOL PC Game Points Recharge 10000 LOL Points Top-Up Fast Delivery

$91.00

Lineage Classic Server Top-Up: HK/Macau/TW/Global, Monthly/Quarterly Cards, Gift Packs, Stored Value & Microtransactions

$13.85

3D Printer Accessories Upgrade Flashforge AD5M Ceramic Hotend Kit Quick-Disconnect Detachable Hardened Steel Nozzle Extruder Print Head

$54.60

Huasu 3D Upgraded V6 Hotend Universal Bambu Nozzle Extruder Accessory, High-Temp High-Speed Print Head

$195.40

Compatible with Bambu Lab A1/A1 mini Hotend Kit Upgrade Brass Heat Dissipation Detachable Hardened Steel Nozzle Accessories

$6.21

Zhen Brand 125/183 Black PVC Electrical Tape, Electrical Insulation Tape, Flame-Retardant, Lead-Free, Waterproof Sealing Identification, Widened Electrical Cloth, High Adhesion, High Voltage Automotive Wire Harness Cables Black Tape

$10.00

Gray Series Hard Cardstock A4/8k for Handmade Paper-Cutting, 4K Colored Pencil Drawing, Full Sheet Thickened A3 Light Gray, Advanced Gray, Smoke Silver, Gentleman Dark Gray for Mounting and Background Design

$8.87

Recommended by Papi Jiang | Anker AI Recording Bean Feishu Smart Voice Recorder Meeting Record Artifact Portable Translation Card

$899.00

Queen Card 50 Yuan Automatic Delivery Official Card Key, No Fake Orders in This Store, Beware of Gambling Scams

$50.00

3D Printer Accessories Hotend Ring Heating Ceramic Heater Aluminum Block V6/Volcano Quick Heating Plate Kit

$96.00

Type-C Mobile USB Flash Drive 512GB Dual Interface 256GB Ultra-High Capacity 1TB for Phone and PC 128GB High-Speed 64GB

$23.70

Hot Sale E3D V6 Titanium Alloy Red Copper Heat Break: Wear-Resistant High-Temp 3D Printer Component for Voron DIY

$21.00

3D Printer Nozzle All-Metal High-Temperature

$41.48

Spring Sowing Various Vegetable Seedlings Complete Collection Four Seasons Tomato Pepper Cucumber Southern Seeds

$42.50

[Lawyer's AI New Partner] DingTalk A1 Legal Edition AI Smart Voice Recorder Analysis Translation Card

$1,099.00

Phaetus Co-Branded with Creality Silicon Carbide K2 Plus/K2 Pro/Hi Integrated All-Metal Silicon Carbide Nozzle

$153.00

Custom Payment QR Code Signs - WeChat Collection Code Stickers, Alipay Friend Ordering Codes, Printed with Adhesive Backing

$3.49

3D Printer Hotend Kit Gold Nano-Coating Hardened Steel Nozzle for Bambu Lab A1/mini

$8.80

Electrician Tape Black Insulating Tape Flame-retardant Cloth Colored High Temperature Resistant High Adhesion PVC Waterproof Cloth Electrical Insulating Cloth

$10.10