A
Anonymous
Mar 26, 2026
Rating: 5/5
Will buy again
Helpful product page and smooth experience overall.
Description
This coated nozzle print head is designed for Bambu Lab X1C, P1P, and P1S 3D printers to enable clean extrusion of PETG filament. The specialized coating reduces material adhesion on the tip, effectively preventing stringing and oozing during high-temperature prints. It serves as a direct replacement component to improve surface finish on hygroscopic materials without requiring extensive parameter tuning. Ensure the printer is cooled and power is disconnected before swapping the hotend assembly.
Reviews
Attributes
| Brand | - |
| Category | Root / Office Equipment, Supplies & Services |
| Origin | - |
| Compatible Models | X1C, P1P, P1S |
| Nozzle Material | Hardened Steel with Anti-Adhesion Coating |
| Nozzle Diameter | 0.4 mm |
| Optimized Filament | PETG, PLA, ABS, ASA |
| Max Temperature | 300°C |
| Thread Type | M6 Standard |
| Coating Technology | Non-stick Ceramic Composite |
| Package Contents | 1x Coated Nozzle, 1x Installation Tool |
| Warranty Period | 90 Days |
| Country of Origin | China |
6 reviews
A
Anonymous
Mar 26, 2026
Rating: 5/5
Solid everyday option
Simple, reliable, and easy to integrate with my existing setup.
A
Anonymous
Mar 23, 2026
Rating: 4/5
Reliable and practical
After a few days of use, it feels dependable and consistent for routine tasks.
A
Anonymous
Mar 22, 2026
Rating: 4/5
Good quality for the price
I use it regularly and the performance has been stable so far.
A
Anonymous
Mar 16, 2026
Rating: 4/5
Works as described
No major issues. The finish and fit are both acceptable for this range.
A
Anonymous
Mar 09, 2026
Rating: 5/5
Exactly what I expected
The Bambu Lab 3D Printer Coated Nozzle Print Head for X1C/P1P/P1S, Prints PETG Without Stringing arrived in good condition and matches the listing details.
5 FAQ
Q: How often should I replace this compared to a brass nozzle?
A: Due to the hardened steel construction and protective coating, this nozzle typically lasts 3 to 5 times longer than a standard brass nozzle, especially when printing abrasive or sticky materials like PETG.
Q: Is this nozzle compatible with the original Bambu Lab X1?
A: This specific coated nozzle is designed for the X1C, P1P, and P1S models. While it may physically fit the original X1, we recommend checking your specific hotend assembly version before purchasing to ensure optimal thermal performance.
Q: Can I use this nozzle with PLA filament?
A: Yes, absolutely. While optimized for PETG to reduce stringing, this nozzle works excellently with PLA, ABS, ASA, and other common filaments. You will notice improved release properties across the board.
Q: Does the package include a heater block or just the nozzle?
A: The package includes only the coated nozzle tip and a small installation tool. It does not include the heater block or thermistor; it is designed to screw into your existing hotend assembly.
Q: What is the maximum safe temperature for this coated nozzle?
A: The nozzle is rated for temperatures up to 300°C. Please ensure you do not exceed this limit to maintain the integrity of the anti-adhesion coating.
![[Lawyer's AI New Partner] DingTalk A1 Legal Edition AI Smart Voice Recorder Analysis Translation Card](https://www.gosteppe.com/cache/medium/product/210126/legacy-main-7b7dc5a93c8519defae1c408.png)
![[Daimai Holds Micro-Needle Hair Transplant Patent] Little Red Cap Hydro Glow | Scalp Hydration and Repair](https://www.gosteppe.com/cache/small/product/270424/legacy-main-ecbdc6ee4688639f4a8ef150.webp)
![MOOCAT [Postage Stamp Stub] Hand-Drawn Blank Irregular Wood Pulp Fine-Texture Paper for Cyanotype, OC Signing, and Collage](https://www.gosteppe.com/cache/small/product/270412/legacy-main-3037a70329c5379f7064bc16.webp)
