Anonymous
Mar 14, 2026
Rating: 4/5
Great performance per dollar
Running motor control algorithms at 168MHz is smooth. The only downside is that it doesn't come with a debugger included, so make sure you have an ST-Link V2 ready.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Development, Learning, Evaluation & Industrial Control Boards |
| Origin | - |
| Microcontroller Model | STM32F407VET6 |
| Architecture | ARM Cortex-M4 32-bit RISC |
| Maximum Frequency | 168 MHz |
| Flash Memory | 512 KB |
| SRAM | 192 KB + 4 KB Backup |
| Operating Voltage | 3.3V |
| Input Voltage Range | 5V via USB or VIN pin |
| I/O Ports | Up to 114 Fast I/Os |
| Communication Interfaces | USB OTG, Ethernet MAC, CAN, SPI, I2C, USART |
| Board Dimensions | 54mm x 39mm |
Anonymous
Mar 14, 2026
Rating: 4/5
Great performance per dollar
Running motor control algorithms at 168MHz is smooth. The only downside is that it doesn't come with a debugger included, so make sure you have an ST-Link V2 ready.
Anonymous
Mar 12, 2026
Rating: 5/5
Excellent documentation support
While the board itself is minimal, there are tons of community resources available for the F407VET6. I got my first blink example running in minutes. Very satisfied.
Anonymous
Mar 07, 2026
Rating: 5/5
Perfect for embedded projects
This board works flawlessly out of the box. The pinout is clearly labeled, and it pairs perfectly with STM32CubeIDE. Great value for learning ARM development.
Anonymous
Mar 07, 2026
Rating: 5/5
Fast delivery and genuine chip
Verified the chip ID using ST-Link utility, and it matches the official specs. The USB connector feels sturdy. Highly recommended for prototyping industrial control systems.
Anonymous
Mar 06, 2026
Rating: 5/5
Best entry point to STM32
I was intimidated by moving from AVR to ARM, but this core board made the transition easy. The voltage regulator handles the 5V input nicely without overheating.
Anonymous
Mar 01, 2026
Rating: 4/5
Good quality but needs careful handling
The build quality is solid and the chip is genuine. Just be careful with the 3.3V logic levels if you are coming from Arduino 5V boards. Otherwise, excellent for university projects.
Q: Does this board come with an onboard programmer/debugger?
A: No, this is a core board and does not include an onboard debugger. You will need an external ST-Link V2 or J-Link debugger to program and debug the device.
Q: Can I power this board via the USB port alone?
A: Yes, the board can be powered directly through the Micro-USB port. It also features a VIN pin if you wish to supply 5V from an external source.
Q: Is this compatible with the Arduino IDE?
A: Yes, you can use this board with the Arduino IDE by installing the STM32duino package. However, for full feature utilization, we recommend using STM32CubeIDE or Keil MDK.
Q: What is the current limit of the 3.3V output pin?
A: The onboard regulator can supply up to 200mA for external components, but it is best practice to keep the load under 150mA to ensure stability and prevent overheating.
Q: Is the flash memory reprogrammable?
A: Yes, the 512KB Flash memory is fully reprogrammable and supports over 10,000 write/erase cycles, which is standard for embedded development workflows.