Anonymous
Mar 28, 2026
Rating: 5/5
Compact and powerful
Surprised by how much functionality is packed into such a small board. The USB interface works well for serial communication debugging. Highly recommended for university lab experiments.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Development, Learning, Evaluation & Industrial Control Boards |
| Origin | - |
| Microcontroller Model | STM32F030C8T6 |
| Core Architecture | ARM Cortex-M0 32-bit RISC |
| Maximum Frequency | 48 MHz |
| Flash Memory | 64 KB |
| SRAM | 8 KB |
| Operating Voltage | 3.3V (5V tolerant inputs) |
| GPIO Pins | Up to 26 fast I/Os |
| Communication Interfaces | 2x USART, 2x SPI, 2x I2C, 1x USB FS |
| Board Dimensions | 45mm x 22mm |
| Programmer Interface | SWD (Serial Wire Debug) |
Anonymous
Mar 28, 2026
Rating: 5/5
Compact and powerful
Surprised by how much functionality is packed into such a small board. The USB interface works well for serial communication debugging. Highly recommended for university lab experiments.
Anonymous
Mar 20, 2026
Rating: 4/5
Great value, minor documentation gap
The hardware quality is excellent for the price. The chip runs stable at 48MHz. I deducted one star because the included PDF manual is very basic, but there are plenty of online resources for the STM32F0 series.
Anonymous
Mar 19, 2026
Rating: 4/5
Good board, needs external programmer
Remember that this board does not have an onboard ST-Link debugger; you need to buy a separate SWD programmer. Once connected, flashing code is instant. The build quality feels durable.
Anonymous
Mar 09, 2026
Rating: 5/5
Reliable minimal system
I've used this for several embedded control projects. The voltage regulation is stable, and the reset button is responsive. It's a solid choice for anyone moving from Arduino to professional ARM development.
Anonymous
Mar 06, 2026
Rating: 5/5
Perfect for beginners and prototyping
This board is exactly what I needed to start learning ARM Cortex-M0 programming. It works flawlessly with the STM32CubeIDE and supports standard SWD programmers. The pinout is clearly labeled, making wiring easy.
Anonymous
Mar 05, 2026
Rating: 5/5
Excellent for industrial control prototypes
Used this to prototype a motor controller logic. The timers and PWM capabilities of the F030 are sufficient for many industrial applications. No overheating issues even after long run times.
Q: Is this board compatible with the Arduino IDE?
A: Yes, it can be used with the Arduino IDE by installing the appropriate STM32 board support package (via Board Manager). However, for full feature utilization, we recommend using STM32CubeIDE.
Q: What is the input voltage range for the VIN pin?
A: The onboard regulator accepts an input voltage typically between 5V and 9V on the VIN pin, which is then regulated down to 3.3V for the microcontroller. Do not exceed 12V.
Q: Can I use 5V logic sensors directly with the GPIO pins?
A: Most GPIO pins on the STM32F030C8T6 are 5V tolerant when configured as inputs, meaning you can connect 5V sensor outputs directly. However, the output voltage from the MCU will always be 3.3V.
Q: Does this board come with an onboard debugger like ST-Link V2?
A: No, this is a minimal system board and does not include an onboard debugger. You will need an external SWD programmer (such as ST-Link V2 or J-Link) to flash code and debug.
Q: Does this support USB Device mode?
A: Yes, the STM32F030C8T6 chip includes a full-speed USB device controller. You can develop USB HID, CDC, or Mass Storage class devices using the STM32 USB Device Library.