Anonymous
Mar 16, 2026
Rating: 4/5
Sharp and effective
Very sharp tips that get into tight spots. Just be careful not to push too hard when the nozzle is cold to avoid breaking the tip, though they seem quite strong.
Description
Reviews
| Brand | - |
| Category | Root / Office Equipment, Supplies & Services |
| Origin | - |
| Material | 304 Stainless Steel |
| Compatibility | Universal 0.4mm Nozzles |
| Needle Diameter | 0.35mm |
| Total Length | 60mm |
| Handle Type | Knurled Grip |
| Heat Resistance | Up to 800°C |
| Package Contents | 5 Cleaning Needles |
| Weight | 15 grams |
| Finish | Polished |
| Usage | Hot and Cold Cleaning |
Anonymous
Mar 16, 2026
Rating: 4/5
Sharp and effective
Very sharp tips that get into tight spots. Just be careful not to push too hard when the nozzle is cold to avoid breaking the tip, though they seem quite strong.
Anonymous
Mar 16, 2026
Rating: 4/5
Good quality steel
The stainless steel feels very durable and doesn't bend easily. I wish the pack came with a small storage case, but for the price, it's a great value.
Anonymous
Mar 09, 2026
Rating: 5/5
Saved my print head!
My nozzle was completely clogged after a failed PLA print. These needles slipped right in while the hotend was warm and cleared the blockage instantly. Much better than using paperclips.
Anonymous
Mar 05, 2026
Rating: 5/5
Essential tool for Ender 3
If you own an Ender 3 or similar printer, buy this immediately. It fits perfectly into the standard 0.4mm nozzles without damaging the interior walls.
Anonymous
Mar 05, 2026
Rating: 5/5
Works on ABS jams too
I had a stubborn ABS jam that solvent couldn't fix. Heated the nozzle to 240C and used this needle to poke through. Flow is back to normal.
Anonymous
Mar 03, 2026
Rating: 5/5
Better than the kit ones
The needles that come with most printer kits are often too soft. These are high-quality stainless steel and maintain their straightness even after multiple uses.
Q: Will this work with a 0.6mm nozzle?
A: Yes, the needle diameter is 0.35mm, so it will fit comfortably inside 0.6mm nozzles as well as the standard 0.4mm size.
Q: Can I use this while the printer is printing?
A: No, please never insert the tool while the printer is actively extruding or moving. Only use it during maintenance when the nozzle is heated but stationary.
Q: How many needles are included in one order?
A: Each package contains 5 individual stainless steel cleaning needles.
Q: Is the handle heat resistant?
A: The metal handle can get hot if held near the heating block. We recommend using pliers or waiting for the nozzle to cool slightly before handling the tool directly.
Q: Does this remove PTFE tube residue?
A: This tool is designed primarily for clearing filament clogs within the brass nozzle. For PTFE tube residue inside the hotend, a reaming tool or disassembly is usually required.