Description
Reviews
| Brand | - |
| Category | Root / Office Equipment, Supplies & Services |
| Origin | - |
| Compatible Printer Series | Bambu Lab P1P, P1S |
| Nozzle Material | Hardened Steel |
| Available Diameters | 0.4mm, 0.6mm, 0.8mm |
| Thread Type | M6 Thread |
| Maximum Temperature | 300°C |
| Best For Filaments | Abrasive materials (Carbon Fiber, Glass Fiber) |
| Package Contents | 3 Nozzles (one of each size) |
| Coating | None (Raw Hardened Steel) |
| Country of Origin | China |
| Item Weight | 15 grams |
Anonymous
Mar 23, 2026
Rating: 4/5
Solid upgrade
Works exactly as expected. The hardened steel handles glass-filled nylon without wearing down. Only giving 4 stars because they take a bit longer to heat up than the stock brass nozzles, but it's negligible.
Anonymous
Mar 20, 2026
Rating: 5/5
Perfect fit for P1S
Installation was straightforward on my P1S. The M6 threading fits perfectly without any cross-threading issues. Highly recommend keeping a set of these on hand if you experiment with different materials.
Anonymous
Mar 18, 2026
Rating: 4/5
Good durability, slightly slower flow
These nozzles are very durable against abrasive filaments. I did notice a slight reduction in flow rate compared to brass when printing at high speeds, but adjusting the flow ratio in the slicer fixed it immediately.
Anonymous
Mar 18, 2026
Rating: 5/5
No more frequent replacements
I used to change my nozzle every few weeks due to abrasion. Since switching to this kit, I haven't had to replace a single nozzle. The initial cost is higher, but it saves money in the long run.
Anonymous
Mar 11, 2026
Rating: 5/5
Essential for carbon fiber prints
Switched to these hardened steel nozzles specifically for printing with CF-PLA. The brass nozzle wore out in two prints, but these have been going strong for months. Print quality remains sharp and consistent.
Anonymous
Mar 03, 2026
Rating: 5/5
Great value kit
Getting all three sizes in one pack is convenient. The 0.6mm nozzle has become my go-to for structural parts where layer adhesion is more important than fine detail. No clogging issues so far.
Q: What is the maximum temperature these nozzles can withstand?
A: These hardened steel nozzles are rated for temperatures up to 300°C, making them suitable for most engineering filaments available for the P1 series.
Q: Can I use these nozzles with standard PLA filament?
A: Yes, you can use them with standard PLA. However, brass nozzles offer slightly better thermal conductivity for non-abrasive filaments. These are best reserved for abrasive materials like carbon fiber or glow-in-the-dark filaments.
Q: Do I need to recalibrate my printer after changing the nozzle size?
A: Yes, whenever you change the nozzle diameter, you must update the printer profile in Bambu Studio to match the new size and run the flow calibration process for optimal results.
Q: Are these nozzles compatible with the X1 Carbon printer?
A: No, this kit is specifically designed for the Bambu Lab P1 Series (P1P and P1S). The X1 series uses a different hotend assembly configuration.
Q: How do I remove a stuck nozzle safely?
A: Heat the hotend to 200°C, then use the provided wrench to unscrew the nozzle while the heatblock is supported. Avoid forcing it when cold to prevent damage to the heater block threads.
Qingling Pickup 2.8T Diesel Isuzu 4JB1-T1 Engine Turbocharger Pump Assembly
$1,502.00
Juli JL-499 Heat Resistant up to 150°C Instant Adhesive High Performance Low Whitening Transparent High-Temperature Fast-Drying Glue
$90.30
Stainless Steel Buffet Warmer with Hydraulic Lift - Commercial Electric Heating Chafing Dish
$882.00
Zhaobei New Felt Calligraphy Mat Anti-Pilling Painting Felt Chinese Painting Cloth Brush Character Calligraphy Felt Pad
$29.70
Fruit Picking Bucket with Shoulder Strap, Manual Fertilizer Spreader, Durable Rubber Harvest Container for Seeds and Chemicals
$26.57
Baohong Artist Grade Watercolor Pad - 100% Cotton Pulp, 300gsm, Glued on Four Sides, Available in 16K, 8K, 4K with Cold Press or Hot Press Texture
$42.00
Commercial Brush Peeling Machine for Sweet Potatoes, Ginger, Taro, Mustard Greens, and Kohlrabi
$15.90
No-Drill Invisible Cable Organizer – Self-Adhesive Wire Fixer, Data Cable Clip, and Net Cable Management Solution
$6.90
Stone Landscape Sculpture Engraved Pebble Gate Stone Cornerstone Roadside Marker
$838.05
Kitchen Sink Organizer Rack, Dish Drying Rack, Multi-Function Countertop Storage Shelf for Washing and Placing Bowls
$55.70
New Hanging Kitchen Sink Strainer Basket, Multi-Function Colander for Washing Vegetables and Filtering Leftovers
$7.74
Sting Bite Relief Pen Electric Bug Bite Relief for Indoor
$60.14
Thickened 160g Gouache Paper 8K/4K for Beginners and Art Exam Students - Professional Art Painting Paper for Watercolor, Gouache, and Acrylic Creation and Practice
$5.78
Pad Printing Ink Cup Sealing Ring Rubber Gasket Elastic Rubber Ink Cartridge O-Ring Silicone Ink Leak-Proof Eco-Friendly Ink Cup Seal
$9.70
Stainless Steel Walnut Kernel Peeling Machine - Pecan Physical Peeling Equipment, DDA Washing Unit, Nut Kernel Peeler
$36,315.00
Daxiang Machinery Top-Flow Pillow Packaging Machine for Vegetables, Bread, Mooncakes, Cakes, Food, and Fruit Sealing
$35,475.00
50 Pcs Market Commodity Price Tag ers Advertising Tags Paper
$45.37
Fountain in the Rain by Kaoru Sudo, Mr. Chui Saxophone, Three-Piece Precise Transcription Service
$37.00
No-Clean Airbrush Set Electric Spray Gun Mini Bottom-Feed Airbrush for Furniture Leather Repair Paint and Art
$225.00
Rubber Cable Raceway Speed Bump for Ground Crossing
$15.05
Replacement Blade Holder and Rotating Wheel for Butter Tea Maker - Includes Waterproof Gasket; Compatible with Milk Separators and Switch Assemblies
$56.50
Commercial Hanging Roast Duck Warmer Crispy Pork Belly Insulation Box Stainless Steel Countertop Roasted Meat Heater Cooked Food Display Cabinet
$317.00
2MM 3MM 4MM Natural Color-Gradient Amethyst Soccer-Cut Faceted Loose Beads - Semi-Finished Amethyst Cuts
$17.00
Educational Toys for Babies 0-3 Years - Newborn Rattle and Musical Stick for Boys and Girls (0-12 Months)
$12.80
Variable Frequency Drive Cabinet for Fans with Energy-Saving VFD Control
$11,334.00
Pure Water Bucket Stand with Manual Pump, Inverted Dispenser Rack for Large Bottles, Simple Water Dispenser
$4.65
Spray Tower Exhaust Gas Treatment System - Industrial Air Purification for Dust, Acid Mist, and Alkali Scrubbing
$1,738.00
Acrylic Markers Opaque Overlapping Colors Art Drawing Pens Specialized Ink Cores
$49.90
Cute Portable Invisible Aligner Case - Storage Box for Orthodontic Retainers, Teeth Correctors, and Dentures
$5.78
SolidWorks Software Remote Installation Service - Versions 2025/2024/2023/2022/2021/2020/2018
$10.00
![[Lawyer's AI New Partner] DingTalk A1 Legal Edition AI Smart Voice Recorder Analysis Translation Card](https://www.gosteppe.com/cache/medium/product/210126/legacy-main-7b7dc5a93c8519defae1c408.png)
