Anonymous
Apr 17, 2026
Rating: 5/5
Perfect EtherCAT Implementation
Communication latency is low. Exactly what I needed for industrial automation testing.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Processor Model | TMS320F28388D |
| Core Configuration | Triple-Core C28x + CLA |
| Communication Protocol | EtherCAT, Ethernet, CAN FD |
| Logic Voltage | 3.3V DC |
| Operating Temperature | -40°C to 85°C |
| Flash Memory | 1MB On-Chip |
| SRAM Memory | 512KB On-Chip |
| GPIO Count | 68 Available Pins |
| Board Dimensions | 50mm x 50mm |
| Package Weight | 15g |
Anonymous
Apr 17, 2026
Rating: 5/5
Perfect EtherCAT Implementation
Communication latency is low. Exactly what I needed for industrial automation testing.
Anonymous
Apr 15, 2026
Rating: 4/5
Good hardware, steep learning curve
The board itself is high quality. Wish the example code for EtherCAT was more detailed for beginners.
Anonymous
Apr 14, 2026
Rating: 3/5
Works but pricey
Functionality is great but compared to other DSP boards, the price is a bit high for hobby use.
Anonymous
Feb 23, 2026
Rating: 5/5
Excellent for Motor Control
Used this for a servo drive project. The triple-core capability handles control loops and comms separately. Very stable performance.
Anonymous
Jan 30, 2026
Rating: 5/5
Reliable Core Board
Fits perfectly into our custom carrier board design. Pinout is standard and reliable.
Q: What debugging interface is used?
A: It features a standard JTAG interface for debugging and programming.
Q: Do you offer volume discounts?
A: Yes, please contact support directly for orders exceeding 10 units.
Q: Can it act as an EtherCAT Slave?
A: Yes, it supports both Master and Slave configurations depending on your firmware.
Q: Which IDE is supported for this board?
A: Code Composer Studio (CCS) is fully supported for development and debugging.
Q: Is 5V tolerance available on GPIO pins?
A: No, GPIOs are 3.3V tolerant only. Please use level shifters for 5V logic.