Anonymous
Mar 18, 2026
Rating: 3/5
Display Brightness
Sensor is accurate but the display is hard to read in direct sunlight. Would prefer a higher brightness setting for outdoor use.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Material | Aluminum Alloy |
| Accuracy Class | C3 Grade |
| Communication Protocol | RS485 Modbus RTU |
| Display Digits | 6-Digit LED |
| Rated Capacity Range | 50kg to 5000kg |
| Excitation Voltage | 5-12V DC |
| Output Sensitivity | 2.0 ± 0.005 mV/V |
| Operating Temperature | -20°C to +60°C |
| Protection Class | IP65 |
| Sensor Cable Length | 3 Meters |
Anonymous
Mar 18, 2026
Rating: 3/5
Display Brightness
Sensor is accurate but the display is hard to read in direct sunlight. Would prefer a higher brightness setting for outdoor use.
Anonymous
Mar 17, 2026
Rating: 5/5
RS485 Works Great
Integration with our PLC was straightforward. The aluminum alloy body feels durable and handles the industrial environment well.
Anonymous
Feb 28, 2026
Rating: 5/5
Excellent Precision
Works perfectly for our packaging line. The RS485 communication is stable and the C3 grade accuracy is exactly what we needed for compliance.
Anonymous
Feb 05, 2026
Rating: 4/5
Good Value
Solid build quality and the display is clear. Setup took a bit of time to configure the Modbus addresses but overall satisfied.
Anonymous
Jan 25, 2026
Rating: 5/5
Reliable Industrial Grade
Been using for 6 months without drift. The 6-digit instrument provides very stable readings even with minor vibrations.
Q: Is calibration weight included?
A: No, calibration weights must be purchased separately based on your specific capacity requirements.
Q: Does this support Modbus RTU?
A: Yes, it uses standard Modbus RTU over RS485 for communication.
Q: What is the sampling rate?
A: The display instrument samples at 100 times per second for high-speed detection.
Q: Can I use this outdoors?
A: It has an IP65 rating, making it suitable for protected outdoor use against dust and water jets.
Q: What power supply is needed?
A: The display instrument requires 220V AC, while the sensor receives DC power from the instrument.