Anonymous
Feb 26, 2026
Rating: 5/5
Stable Readings
Very stable output once grounded properly. Highly recommend for precision weighing tasks.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Chip Model | HX711 |
| ADC Resolution | 24-Bit |
| Input Channels | 2 Differential Channels (A & B) |
| Operating Voltage | 2.6V to 5.5V DC |
| Interface Type | Serial Interface (CLK, DT) |
| Selectable Rate | 10SPS or 80SPS |
| Operating Temperature | -40°C to +85°C |
| Board Dimensions | 20mm x 17mm x 7mm |
| Net Weight | 2 grams |
| Compatibility | Arduino, STM32, ESP8266, Raspberry Pi |
Anonymous
Feb 26, 2026
Rating: 5/5
Stable Readings
Very stable output once grounded properly. Highly recommend for precision weighing tasks.
Anonymous
Feb 15, 2026
Rating: 5/5
Essential for Load Cells
If you have a load cell you need this module. Easy to interface with microcontrollers.
Anonymous
Feb 12, 2026
Rating: 3/5
Documentation could be better
Had trouble finding pinout initially. Works fine now but beginners might struggle.
Anonymous
Jan 27, 2026
Rating: 4/5
Good value
Solid module but calibration takes time. Once set up it works well for hobby projects.
Anonymous
Jan 21, 2026
Rating: 5/5
Perfect for DIY Scale
Works flawlessly with my kitchen scale project. The readings are stable and the library support is excellent.
Q: Can I connect multiple modules?
A: Yes, each requires separate data lines but they can share clock lines in some configurations.
Q: How do I select 80SPS?
A: Connect the RATE pin to VCC to select 80SPS. Leave floating for 10SPS.
Q: What is the max weight it can measure?
A: Depends on the load cell connected. The module amplifies the signal from the cell.
Q: Is there an Arduino library?
A: Yes, several open-source libraries are available on GitHub for easy integration.
Q: Does this work with 3.3V logic?
A: Yes, it operates between 2.6V and 5.5V so it is compatible with 3.3V systems.