Anonymous
Mar 22, 2026
Rating: 4/5
Good value for industrial use
Using these in a warehouse environment with varying temperatures. They hold up well against dust and minor humidity spikes. The casing feels durable.
Description
Reviews
| Brand | - |
| Category | Machinery & Equipment / Thermo-hygrometers |
| Origin | - |
| Communication Protocol | RS485 (Modbus RTU) |
| Temperature Range | -40°C to +80°C |
| Humidity Range | 0% to 100% RH |
| Temperature Accuracy | ±0.5°C @ 25°C |
| Humidity Accuracy | ±3% RH @ 25°C |
| Power Supply | DC 5V - 24V |
| Response Time | < 8 seconds |
| Housing Material | ABS Engineering Plastic |
| Cable Length | 2 Meters (Customizable) |
| Application Scenario | Server Rooms, Warehouses, Greenhouses |
Anonymous
Mar 22, 2026
Rating: 4/5
Good value for industrial use
Using these in a warehouse environment with varying temperatures. They hold up well against dust and minor humidity spikes. The casing feels durable.
Anonymous
Mar 21, 2026
Rating: 5/5
Perfect for our server room monitoring
We installed six of these units across our data center racks. The RS485 communication is stable, and the Modbus integration with our SCADA system was seamless. Readings are consistent and match our calibrated reference meters.
Anonymous
Mar 17, 2026
Rating: 4/5
Solid industrial sensor
Great build quality and accurate readings. The only reason for 4 stars instead of 5 is that the documentation for the register map could be more detailed, but support helped us figure it out quickly.
Anonymous
Mar 14, 2026
Rating: 5/5
Reliable and cost-effective
Replaced our old wireless sensors with these wired units to eliminate battery changes and signal interference issues. They have been running 24/7 for three months without a single dropout.
Anonymous
Mar 06, 2026
Rating: 5/5
Accurate and stable
We needed precise monitoring for a pharmaceutical storage area. These sensors provide the stability and accuracy required for our compliance logs. Highly recommended.
Anonymous
Mar 02, 2026
Rating: 5/5
Easy integration with PLC
Connected directly to our Siemens PLC via RS485. Configuration was straightforward using the provided address list. The response time is fast enough for our HVAC control logic.
Q: Can I power this device with 12V DC?
A: Absolutely. The sensor operates on a wide voltage range of DC 5V to 24V, so a 12V DC power supply is perfectly suitable and commonly used.
Q: Does this sensor support multiple devices on a single RS485 bus?
A: Yes, the device supports Modbus RTU which allows you to connect up to 247 devices on a single two-wire RS485 bus by assigning unique slave IDs to each unit.
Q: Is there a digital display on the unit itself?
A: No, this specific model ([TITF]) is designed as a headless sensor for integration into larger systems. It does not have a local LCD screen; data is read exclusively via the RS485 interface.
Q: What is the maximum cable length recommended for reliable communication?
A: For standard RS485 communication at 9600 baud rate, we recommend a maximum cable length of 1200 meters. Using shielded twisted pair cable is advised for noisy industrial environments.
Q: How do I calibrate the sensor if the reading drifts over time?
A: The sensor features software calibration commands via Modbus registers. You can apply offset corrections for both temperature and humidity without opening the housing. Please refer to the calibration section in the user manual for register addresses.