Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Sensors |
| Origin | - |
| Operating Voltage | 3.3V - 5V DC |
| Output Signal | Digital Switch Output (0 and 1) |
| Detection Medium | Water and non-corrosive liquids |
| PCB Dimensions | 65mm x 20mm x 8mm |
| Fixed Bolt Hole Diameter | 3.0mm |
| Comparator Chip | LM393 |
| Sensitivity Adjustment | Adjustable via potentiometer |
| Interface Type | 3-pin PH2.0 connector |
| Working Temperature | -10°C to +50°C |
| Application Scope | Arduino, Raspberry Pi, DIY projects |
Anonymous
Mar 29, 2026
Rating: 5/5
Perfect for my aquarium project
This sensor works exactly as described. I used it to monitor the water level in my custom aquarium setup, and the digital output is very stable. The sensitivity adjustment screw makes it easy to calibrate for different liquid types.
Anonymous
Mar 28, 2026
Rating: 5/5
Great for beginners
As someone new to electronics, I found this module very forgiving. The three pins are clearly labeled, and it doesn't require complex circuitry. It instantly helped me build a water leak alarm.
Anonymous
Mar 26, 2026
Rating: 4/5
Solid performance
Works well for general liquid level monitoring. The board quality seems decent with good soldering points. Just ensure you do not submerge the entire PCB, only the sensing traces at the bottom.
Anonymous
Mar 25, 2026
Rating: 5/5
Reliable detection
I tested this with both fresh water and salt water. It detects the surface level accurately every time. The LM393 comparator ensures a clean signal transition, which is crucial for my logic controller.
Anonymous
Mar 11, 2026
Rating: 4/5
Good value, easy to integrate
Integrated this with an Arduino Uno without any issues. The code examples found online worked immediately. Only giving 4 stars because the included wires are a bit short, but otherwise a solid module.
Anonymous
Mar 01, 2026
Rating: 5/5
Essential for auto-watering system
Using two of these in my greenhouse reservoir. One for low-level warning and one for high-level cutoff. They have been running continuously for a month with no false triggers. Highly recommended.
Q: How do I adjust the sensitivity?
A: There is a blue potentiometer on the board. Turn it clockwise to increase sensitivity (detect lower liquid levels) and counter-clockwise to decrease it. Test with your specific liquid to find the optimal setting.
Q: Can this sensor detect oil levels or just water?
A: This sensor can detect most non-corrosive conductive liquids, including water and some oils. However, highly viscous or non-conductive fluids may require calibration or might not trigger the sensor reliably.
Q: Is this module waterproof?
A: The sensing traces at the bottom are designed to come into contact with liquid, but the electronic components on the top side of the PCB are not waterproof. Please avoid submerging the entire module.
Q: Does this work with 3.3V logic systems like ESP32?
A: Yes, the module operates on a voltage range of 3.3V to 5V, making it fully compatible with 3.3V logic systems such as the ESP32, ESP8266, and 3.3V Arduino boards.
Q: What is the maximum current this output pin can handle?
A: The digital output pin is intended for signal processing and should be connected to a microcontroller GPIO. It is not designed to drive high-current loads directly; please use a relay or transistor for switching pumps.
Photoresistor Relay Sensor Control Module 24V - Light-Controlled Switch and Dark-Sensing Module
$35.20
UV Sensor UV Detector Illuminance Sunlight Transmitter UV Intensity Tester Measurement Monitor
$104.00
49E Linear Hall Sensor Module for Magnetic Field Detection with PH2.0 Interface for Electronic Building Blocks
$7.35
SO2 Sulfur Dioxide Gas Sensor Electrochemical Industrial Toxic Gas Detector Alarm
$630.00
49E Linear Hall Sensor Module Magnetic Field Induction Switch Board DIY Electronic Building Blocks
$2.53
Photoresistor Relay Sensor Control Module, Light-Controlled Switch, No-Light Sensing Module, 12V
$40.00
S12SD UV Sensor Module - High-Sensitivity Sunlight Intensity and UV Radiation Detector
$25.90
Honeywell SS39ET SS49E SOT-23 TO-92S Linear Hall Effect Sensor Magnetic Field
$8.00
Raspberry Pi 5 Development Board 2G/4G/8G/16G Motherboard
$1,572.00
EQ-730L High-Sensitivity Linear Hall Current Sensor for Magnetic Field Detection and Limit Measurement
$8.25
UV Sensor RS485 Illuminance Transmitter UV Monitor and Solar Radiation Detector
$376.50
Waveshare Raspberry Pi 4 Dedicated Industrial DIN Rail Enclosure Aluminum Alloy Case with Cooling Fan/Heatsink
$95.10
Photoresistor Sensor Module, Automatic Brightness Control, DC 5V/12V Light-Controlled Relay, Light Switch Sensor
$15.10
Raspberry Pi 4 Model B 8G/4G Development Board, Raspberry Pi 4B & Pi 5 Motherboard for Programming and AI Kits
$570.00
Aluminum Alloy DIN Rail Case for Raspberry Pi 4 with Matching Cooling Fan and Heatsink Large Internal Space
$96.80
S12SD High-Sensitivity UV Ultraviolet Sensor Module for Sunlight Intensity Detection Circuit Board
$28.50
Waveshare Raspberry Pi 4 Aluminum Alloy Rail Case High Hardness Chassis with Cooling Fan and Heatsink
$96.80
Raspberry Pi 5 Beginner Sensor Kit for OpenCV AI Vision Development
$1,398.00
Raspberry Pi 5 Sensor Kit for Vision Applications, Compatible with 5B, 5th Gen, R4g, 8g Development Boards
$1,174.20
Waveshare Raspberry Pi 4 Dedicated Industrial DIN Rail Enclosure Aluminum Case with Cooling Fan/Heatsink
$99.80
Waveshare Dedicated Dual-Fan Cooling Frosted Case for Raspberry Pi 4, Includes Cooling Fans and Metal Enclosure
$100.20
UV Probe for Water Treatment, UV Sensor Transmitter, Ultraviolet Intensity Monitor, Illuminance Transmitter
$2,580.00
Starter Kit for Raspberry Pi 3 Model B+ - RFID Sensor Learning Suite
$204.00
Raspberry Pi 5 Development Board PCIe Motherboard Linux YAHBOOM Smart Kit
$636.50
Waveshare Raspberry Pi 4 Dedicated Dual-Fan Cooling Frosted Case with Metal Enclosure and Matching Fans
$100.20
Waveshare Raspberry Pi 4 Dedicated Aluminum Alloy DIN-Rail Enclosure with High Hardness, Includes Cooling Fan and Heatsink
$101.40
S12SD UV Sensor Module, High-Sensitivity Sunlight Intensity Detector for UV Radiation
$7.96
Raspberry Pi 4B Experiment Board Sensor Kit for Youth Programming Learning with Python/Scratch 3.0
$1,365.00
Waveshare Raspberry Pi 4 Aluminum Alloy Rail Case with High Hardness, Includes Cooling Fan and Heatsink
$101.40
Human Body Induction Switch, Proximity Infrared Sensor, Automation Module, Smart Detection Door Sensor
$39.55
Free Shipping
Enjoy free shipping on all orders
Product Replace
Easy Product Replacement Available!
Emi Available
No cost EMI available on all major credit cards
24/7 Support
Dedicated 24/7 support via chat and email
