Anonymous
Mar 30, 2026
Rating: 4/5
Good quality, needs precise tuning
Solid brass build quality. It took a little time to get the air-to-liquid ratio just right for our cooling system, but once tuned, it works perfectly. No dripping issues.
Description
Reviews
| Brand | - |
| Category | Root / Packaging |
| Origin | - |
| Material | Brass |
| Nozzle Type | Air Atomizing |
| Spray Pattern | Fine Micro-mist |
| Adjustability | Flow and Spray Angle Adjustable |
| Mixing Mechanism | Gas-Liquid Suction Mixing |
| Thread Size | 1/4 inch NPT |
| Operating Pressure | 0.2 - 0.7 MPa |
| Application | Humidification, Cooling, Dust Control |
| Finish | Polished Brass |
| Model Number | KB-Series |
Anonymous
Mar 30, 2026
Rating: 4/5
Good quality, needs precise tuning
Solid brass build quality. It took a little time to get the air-to-liquid ratio just right for our cooling system, but once tuned, it works perfectly. No dripping issues.
Anonymous
Mar 26, 2026
Rating: 5/5
Excellent for dust suppression
We installed these in our packaging facility to control dust. The suction mixing mechanism creates a very fine fog that settles particles effectively without wetting the boxes.
Anonymous
Mar 19, 2026
Rating: 3/5
Works well but instructions are vague
The nozzle itself performs as advertised, producing a fine mist. However, the manual lacked specific pressure charts for different fluid viscosities. Had to experiment to find the sweet spot.
Anonymous
Mar 12, 2026
Rating: 5/5
Perfect mist for our greenhouse
The adjustability on this brass nozzle is fantastic. We use it for humidification in our commercial greenhouse, and the micro-mist coverage is even and consistent. Very durable construction.
Anonymous
Mar 12, 2026
Rating: 4/5
Great spray pattern
The atomization is very fine, much better than the plastic nozzles we replaced. Only giving 4 stars because the connection thread required some Teflon tape to seal completely.
Anonymous
Mar 03, 2026
Rating: 5/5
Robust and reliable
Been running these 24/7 in an industrial setting for three months. The brass hasn't corroded, and the adjustment screws haven't loosened. Great value for the price.
Q: What is the thread specification for the liquid inlet?
A: Both the air and liquid inlets feature standard 1/4 inch NPT threads, compatible with most industrial piping and tubing fittings.
Q: Can this nozzle handle corrosive chemicals?
A: While made of brass which offers good corrosion resistance, we recommend checking chemical compatibility charts for specific aggressive solvents or acids before use.
Q: What is the maximum operating pressure for this nozzle?
A: The KB series nozzle is rated for a maximum operating pressure of 0.7 MPa (approximately 100 PSI). Exceeding this may affect the spray pattern integrity.
Q: How do I adjust the droplet size?
A: Droplet size is controlled by adjusting the ratio of air pressure to liquid flow rate. Increasing air pressure relative to liquid flow will produce a finer mist.
Q: Does this come with a filter insert?
A: No, the nozzle does not include an internal filter. We highly recommend installing an inline strainer upstream to prevent clogging of the fine atomizing orifice.