Attributes

Brand	-
Category	Root / Office Equipment, Supplies & Services
Origin	-
Compatible Printer Model	Anycubic Kobra 3
Nozzle Material	Hardened Steel
Heater Block Type	Ceramic Upgrade V2
Nozzle Diameter	0.4mm (Standard)
Maximum Temperature	300°C
Thermistor Type	NTC 100K
Heater Cartridge Voltage	24V
Package Contents	1x Hotend Assembly, 1x Nozzle, 1x Silicone Sock
Filament Compatibility	PLA, PETG, ABS, Carbon Fiber, Wood Fill
Assembly Difficulty	Moderate (Requires basic tools)

6 reviews

Anonymous

Mar 16, 2026

Rating: 5/5

Perfect upgrade for abrasive filaments

I switched to this hardened steel nozzle assembly specifically for printing carbon fiber PLA, and it has been flawless. The ceramic heater block maintains temperature much more consistently than the stock aluminum one. Installation took about 20 minutes.

Anonymous

Mar 14, 2026

Rating: 4/5

Great quality, instructions could be better

The build quality of the hotend is excellent. It feels very sturdy and the fit on my Kobra 3 was precise. I deducted one star because the included paper instructions were a bit vague regarding wire routing, but online videos helped clarify.

Anonymous

Mar 12, 2026

Rating: 5/5

Solved my clogging issues

I was constantly getting clogs with my old setup when printing at higher speeds. This V2 assembly with the ceramic block has completely eliminated that problem. My print success rate has gone up significantly since installing this.

Anonymous

Mar 08, 2026

Rating: 5/5

Excellent thermal performance

The heat retention on this unit is impressive. I can print ABS without an enclosure now and get great layer adhesion. The hardened steel nozzle shows no signs of wear after 2kg of filament.

Anonymous

Mar 03, 2026

Rating: 3/5

Good product but pricey

It works exactly as advertised and the print quality is top-notch. However, I feel the price point is a little high compared to buying the components separately. Still, the convenience of a pre-assembled unit is nice.

Anonymous

Mar 01, 2026

Rating: 5/5

Robust and reliable

As someone who prints engineering prototypes daily, reliability is key. This upgraded extruder assembly has run for over 100 hours without a single hiccup. The ceramic insulation really helps with energy efficiency too.

5 FAQ

Q: What tools are needed for installation?

A: You will typically need a hex key set (usually 2mm and 2.5mm) and a small wrench or pliers to remove the old nozzle. A pair of tweezers is also helpful for managing the wires.

Q: Will this increase the maximum printing speed of my printer?

A: The improved thermal stability of the ceramic heater block allows for more consistent melting at higher flow rates, which can enable faster printing speeds without compromising quality, provided your printer's mechanics can handle the speed.

Q: Can I use this nozzle to print pure metal filaments?

A: While the hardened steel nozzle is durable, we do not recommend printing pure metal filaments as they require specialized industrial extruders. This unit is best suited for PLA, PETG, ABS, and composite filaments like carbon fiber or wood fill.

Q: Does the package include a silicone sock?

A: Yes, the package includes one high-temperature silicone sock to help maintain consistent heat and protect the heater block from cooling fans.

Q: Is this compatible with the original Anycubic Kobra or only the Kobra 3?

A: This specific V2 assembly is designed exclusively for the Anycubic Kobra 3. It is not compatible with the original Kobra or Kobra 2 models due to different mounting brackets and wiring harnesses.

Explore your interests

Xiaomi Official Flagship, Compatible with T200/T200C, Mijia Sonic Electric Toothbrush Heads, 3-Pack

$39.00

3D Printer DIY Accessories 6*20 Single-End Electric Heating Tube 50W High-Power High-Temperature Heating Rod Single-End 24V

$30.00

Leji 3D Printer Bambu Lab High-Conductivity GD900 Thermal Grease for Hotend, Throat Tube, and Heatsink

$7.60

HP Type-C Dual Interface USB Flash Drive - Phone Backup Tool for Computers, Large Capacity for iPhone 15/16/17

$79.90

VORON 0.1/2.4 Print Head Replacement Dragon Nozzle E3D V6 Hot End Upgrade DIY

$52.91

FANMU MP3 Player for Students - Dedicated English Listening Device for High Schoolers, Bluetooth MP4 Music Player

$179.00

Fanmu MP4 with WiFi Internet Access, MP5 for High School Students, Dedicated MP3 Portable Music Player, Magical Device for Listening to Songs, MP9

$199.00

ND Ceramic Heating Block Brass Hardened Steel Nozzle High-Speed Printing Hotend

$90.54

3D Printer Accessories Hotend Ring Heating Ceramic Heater Aluminum Block V6/Volcano Quick-Heat Sheet Kit

$96.00

Nozzle Cleaning Brush for 3D Printer Aluminum Block Rust Removal

$1.80

3D Printer Hotend Heating Assembly for H2D

$169.00

League of Legends LOL PC Game Points Recharge 10000 LOL Points Top-Up Fast Delivery

$91.00

Lineage Classic Server Top-Up: HK/Macau/TW/Global, Monthly/Quarterly Cards, Gift Packs, Stored Value & Microtransactions

$13.85

3D Printer Accessories Upgrade Flashforge AD5M Ceramic Hotend Kit Quick-Disconnect Detachable Hardened Steel Nozzle Extruder Print Head

$54.60

Huasu 3D Upgraded V6 Hotend Universal Bambu Nozzle Extruder Accessory, High-Temp High-Speed Print Head

$195.40

Compatible with Bambu Lab A1/A1 mini Hotend Kit Upgrade Brass Heat Dissipation Detachable Hardened Steel Nozzle Accessories

$6.21

Zhen Brand 125/183 Black PVC Electrical Tape, Electrical Insulation Tape, Flame-Retardant, Lead-Free, Waterproof Sealing Identification, Widened Electrical Cloth, High Adhesion, High Voltage Automotive Wire Harness Cables Black Tape

$10.00

Gray Series Hard Cardstock A4/8k for Handmade Paper-Cutting, 4K Colored Pencil Drawing, Full Sheet Thickened A3 Light Gray, Advanced Gray, Smoke Silver, Gentleman Dark Gray for Mounting and Background Design

$8.87

Recommended by Papi Jiang | Anker AI Recording Bean Feishu Smart Voice Recorder Meeting Record Artifact Portable Translation Card

$899.00

Queen Card 50 Yuan Automatic Delivery Official Card Key, No Fake Orders in This Store, Beware of Gambling Scams

$50.00

3D Printer Accessories Hotend Ring Heating Ceramic Heater Aluminum Block V6/Volcano Quick Heating Plate Kit

$96.00

Type-C Mobile USB Flash Drive 512GB Dual Interface 256GB Ultra-High Capacity 1TB for Phone and PC 128GB High-Speed 64GB

$23.70

Hot Sale E3D V6 Titanium Alloy Red Copper Heat Break: Wear-Resistant High-Temp 3D Printer Component for Voron DIY

$21.00

Multi-Function Direct Extruder Kit 10-in-1 for 3D Printers

$97.80

Spring Sowing Various Vegetable Seedlings Complete Collection Four Seasons Tomato Pepper Cucumber Southern Seeds

$42.50

[Lawyer's AI New Partner] DingTalk A1 Legal Edition AI Smart Voice Recorder Analysis Translation Card

$1,099.00

Phaetus Co-Branded with Creality Silicon Carbide K2 Plus/K2 Pro/Hi Integrated All-Metal Silicon Carbide Nozzle

$153.00

Custom Payment QR Code Signs - WeChat Collection Code Stickers, Alipay Friend Ordering Codes, Printed with Adhesive Backing

$3.49

3D Printer Hotend Kit Ceramic Nozzle for Creality Ender 3 V3/V3 Plus

$11.85

Electrician Tape Black Insulating Tape Flame-retardant Cloth Colored High Temperature Resistant High Adhesion PVC Waterproof Cloth Electrical Insulating Cloth

$10.10