Anonymous
Mar 17, 2026
Rating: 5/5
Perfect for Input Shaping
This bracket made installing the accelerometer on my multi-nozzle setup incredibly easy. The resonance compensation data is clean and my print quality improved immediately.
Description
Reviews
| Brand | - |
| Category | Root / Office Equipment, Supplies & Services |
| Origin | - |
| Compatibility | FLY F4/F7 Boards, Klipper Firmware |
| Sensor Model | LIS2DW High Precision Accelerometer |
| Interface | USB-C Connection |
| Primary Function | Resonance Compensation & Input Shaping |
| Mounting Type | Multi-Nozzle Bracket Adapter |
| Material | Reinforced Nylon Composite |
| Weight | 12 grams |
| Dimensions | 45mm x 30mm x 15mm |
| Firmware Support | Klipper, Moonraker Compatible |
| Package Includes | 1x Bracket, 1x USB Cable, Mounting Screws |
Anonymous
Mar 17, 2026
Rating: 5/5
Perfect for Input Shaping
This bracket made installing the accelerometer on my multi-nozzle setup incredibly easy. The resonance compensation data is clean and my print quality improved immediately.
Anonymous
Mar 16, 2026
Rating: 5/5
Best upgrade for the price
Amazing value. The precision of the sensor combined with this dedicated bracket makes the whole process plug-and-play. My prints are noticeably smoother now.
Anonymous
Mar 14, 2026
Rating: 4/5
Solid accessory
Works exactly as described. The bracket design is smart and doesn't interfere with the nozzle movement. Make sure you have the latest Klipper version for best results.
Anonymous
Mar 12, 2026
Rating: 5/5
Solved my ringing issues
I was struggling with ghosting on my corners. After mounting this and running the calibration macros, the rings are completely gone. Highly recommended for FLY board users.
Anonymous
Mar 11, 2026
Rating: 5/5
Essential for high speed printing
If you are running Klipper at high speeds, this is a must-have. The LIS2DW sensor provides accurate data for smoothing out vibrations. Installation took less than 10 minutes.
Anonymous
Mar 08, 2026
Rating: 4/5
Great build quality
The nylon material feels very durable. It fits snugly on the toolhead. Only giving 4 stars because the USB cable could be a bit longer for some frame configurations.
Q: What software is required to read the data?
A: You need Klipper firmware installed on your printer. The data is processed via the `MEASURE_RESIDUAL_VIBRATIONS` macro within the Klipper environment.
Q: Is the USB cable included in the package detachable?
A: Yes, the unit comes with a standard detachable USB-C cable, allowing you to replace it with a longer or higher-quality cable if needed.
Q: Can I leave the accelerometer attached permanently during normal printing?
A: While physically possible, it is generally recommended to remove the accelerometer after calibration to reduce moving mass, unless your motor torque can easily handle the extra weight.
Q: Is this compatible with non-FLY boards if I use a generic USB connection?
A: Yes, as long as your host system supports USB accelerometers in Klipper, this device should work, though it is optimized for FLY ecosystems.
Q: Does this bracket fit dual extruder setups specifically?
A: Yes, the 'Multi-Nozzle' design is intended to accommodate various toolhead configurations, including dual extruders, without obstructing movement.