Anonymous
Mar 22, 2026
Rating: 5/5
Highly recommended
Exact match for the Creality CR-6 SE. The machining on the heat break looks precise. My print speeds have improved because I don't have to slow down for heat creep anymore.
Description
Reviews
| Brand | - |
| Category | Root / Office Equipment, Supplies & Services |
| Origin | - |
| Compatible Model | Creality CR-6 SE |
| Nozzle Diameter | 0.4 mm (Standard) |
| Filament Size | 1.75 mm |
| Material | Aluminum Alloy & Brass |
| Heater Power | 24V 40W |
| Thermistor Type | NTC 100K |
| Cooling Fan | Included (24V) |
| Assembly Status | Pre-assembled Full Hotend |
| Connector Type | XH2.54 2-Pin |
| Package Weight | 180g |
Anonymous
Mar 22, 2026
Rating: 5/5
Highly recommended
Exact match for the Creality CR-6 SE. The machining on the heat break looks precise. My print speeds have improved because I don't have to slow down for heat creep anymore.
Anonymous
Mar 19, 2026
Rating: 5/5
Perfect replacement for my CR-6 SE
My original hotend started clogging frequently after six months. This upgrade was a direct fit and took only 15 minutes to install. Prints are back to being crisp and detailed.
Anonymous
Mar 09, 2026
Rating: 5/5
Great value upgrade
For the price, you can't beat getting the whole assembly including the fan and thermistor. It saved me the trouble of trying to replace individual components.
Anonymous
Mar 09, 2026
Rating: 4/5
Good quality, fast shipping
The build quality feels solid. The brass nozzle heats up evenly. I deducted one star because the fan cable was slightly shorter than expected, but it still reached the connector.
Anonymous
Mar 08, 2026
Rating: 5/5
Solved my under-extrusion issues
I was struggling with inconsistent extrusion. Swapping in this full assembly fixed the problem immediately. The thermal coupling seems much better than the stock part.
Anonymous
Mar 03, 2026
Rating: 4/5
Works well with PLA and PETG
I've run about 2kg of filament through this so far with no clogs. Temperature stability is excellent. Just make sure to level your bed again after installation.
Q: Do I need to update the firmware after installing this?
A: No firmware update is required. This is a hardware replacement that uses the same electrical specifications as the original factory part.
Q: Does this come with a spare nozzle?
A: No, this package includes the full hotend assembly with one pre-installed 0.4mm nozzle. Spare nozzles are sold separately.
Q: Is the silicone sock included in this kit?
A: Yes, the assembly comes with a protective silicone sock pre-installed to help maintain consistent temperatures and protect against burns.
Q: What is the maximum temperature this hotend can handle?
A: The heater cartridge and thermistor are rated for continuous operation up to 260°C, which is suitable for PLA, PETG, ABS, and TPU filaments.
Q: Is this compatible with the original CR-6 or only the SE version?
A: This assembly is specifically designed for the CR-6 SE model due to differences in the mounting bracket and connector layout. It is not directly compatible with the non-SE CR-6 without modification.