Anonymous
Apr 14, 2026
Rating: 5/5
High Temp Stability
Printing ABS at 280°C with no issues. Temperature stability is excellent compared to the standard brass hotend.
Description
Reviews
| Brand | - |
| Category | 3D Printing Accessories / Hot End and Nozzle |
| Origin | - |
| Compatibility | Bambu Lab X1C, P1P |
| Material Composition | Semi-Hardened Steel |
| Nozzle Diameter | 0.4 mm |
| Maximum Temperature | 300°C |
| Package Quantity | 2 Units |
| Extruder Version | 2.0 Upgrade |
| Heater Cartridge Voltage | 24V |
| Heater Power | 40W |
| Thermistor Type | NTC 100K |
| Assembly Design | Removable Quick-Swap |
Anonymous
Apr 14, 2026
Rating: 5/5
High Temp Stability
Printing ABS at 280°C with no issues. Temperature stability is excellent compared to the standard brass hotend.
Anonymous
Apr 13, 2026
Rating: 5/5
Easy Install Process
Took me about 15 minutes to swap out. The quick-swap design makes maintenance much easier than the stock version.
Anonymous
Mar 20, 2026
Rating: 5/5
Good to Have a Spare
Buying the two-pack was smart. One is installed and the other is ready as a backup. No downtime if one clogs.
Anonymous
Mar 16, 2026
Rating: 5/5
Handles Abrasive Filaments
I switched to carbon fiber nylon and this hotend handles it without wear. Highly recommend for engineering materials.
Anonymous
Feb 05, 2026
Rating: 5/5
Perfect Upgrade for P1P
Installation was straightforward and the print quality improved immediately. Great value for a two-pack.
Q: Does this come with nozzles pre-installed?
A: Yes, each unit comes with a 0.4mm semi-hardened steel nozzle already installed and ready to use.
Q: Is this compatible with the Bambu Lab P1S?
A: Yes, the hotend assembly is compatible with the P1S as it shares the same extruder architecture as the P1P and X1C.
Q: Do I need to update firmware before installing?
A: No firmware update is required specifically for this hardware upgrade, but keeping your printer updated is always recommended.
Q: What is the maximum safe operating temperature?
A: The assembly is rated for continuous operation up to 300°C, suitable for most high-temperature filaments.
Q: Are the heater wires the same length as OEM?
A: Yes, the cable lengths match the original equipment specifications to ensure proper routing inside the toolhead.