Anonymous
Mar 29, 2026
Rating: 4/5
Solid performance
Works as described. Packaging was secure. Would recommend for intermediate electronics hobbyists.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface Type | UART TTL |
| Sensor Axes | 6-Axis (3-Accel + 3-Gyro) |
| Operating Voltage | 3.3V to 5V DC |
| Baud Rate | 9600bps to 115200bps |
| Temperature Compensation | Built-in Algorithm |
| Output Parameters | Angle, Acceleration, Gyro, Temp |
| Module Size | 23mm x 17mm x 3mm |
| Mounting Hole Distance | 15mm |
| Communication Protocol | ASCII / Modbus |
| Suitable For | Robotics, UAV, Balance Cars |
Anonymous
Mar 29, 2026
Rating: 4/5
Solid performance
Works as described. Packaging was secure. Would recommend for intermediate electronics hobbyists.
Anonymous
Mar 04, 2026
Rating: 5/5
Perfect for my balance robot
Integration was straightforward using the UART interface. The angle data is very stable even during movement.
Anonymous
Feb 07, 2026
Rating: 5/5
Fast shipping, great module
Using it for a camera gimbal project. The response time is quick and accurate.
Anonymous
Jan 28, 2026
Rating: 4/5
Good value sensor
Data is stable and the price is reasonable. Documentation could be slightly more detailed for beginners.
Anonymous
Jan 27, 2026
Rating: 5/5
Excellent stability
Temperature compensation works well. I noticed less drift compared to cheaper MPU6050 modules.
Q: Does it require calibration?
A: The module comes pre-calibrated from the factory, but dynamic calibration is recommended for high-precision applications.
Q: Is the connection cable included?
A: No, the module comes with header pins. You will need to solder wires or use a connector separately.
Q: What is the power consumption?
A: The module typically consumes around 50mA during normal operation.
Q: What is the max operating temperature?
A: The recommended operating temperature range is -40 to 85 degrees Celsius.
Q: Is this compatible with Arduino Uno?
A: Yes, it is compatible via UART communication. You will need to connect the TX and RX pins correctly.