Anonymous
Apr 10, 2026
Rating: 3/5
Needs patience
Works but calibration took some time to get right. Documentation could be better.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface Type | UART / GPIO |
| Operating Voltage | 4.8V - 5.5V DC |
| ADC Resolution | 24-Bit |
| Load Cell Capacity | 5kg / 10kg Options |
| Compatible Boards | Arduino, Raspberry Pi, STM32 |
| Load Cell Material | Aluminum Alloy |
| Module Dimensions | 20mm x 17mm x 7mm |
| Connection Cable | 1.5 Meters Included |
| Sampling Rate | 10SPS or 80SPS |
| Package Weight | 25 Grams |
Anonymous
Apr 10, 2026
Rating: 3/5
Needs patience
Works but calibration took some time to get right. Documentation could be better.
Anonymous
Mar 16, 2026
Rating: 4/5
Good value kit
The sensor is accurate enough for hobby use. Wires could be a bit longer but overall satisfied.
Anonymous
Mar 14, 2026
Rating: 5/5
Perfect for DIY Projects
Works flawlessly with my Arduino setup. Calibration was straightforward using the standard library.
Anonymous
Mar 13, 2026
Rating: 5/5
Great sensor module
HX711 is a classic for a reason. This kit has everything needed to start weighing.
Anonymous
Feb 17, 2026
Rating: 5/5
Accurate and Stable
Been using this for a kitchen scale project. Readings are stable after warm-up.
Q: What is the refresh rate?
A: You can select between 10SPS or 80SPS by configuring the RATE pin on the module.
Q: Is this compatible with 3.3V logic?
A: Yes, the module supports 3.3V to 5V logic levels, but 5V is recommended for stability.
Q: Does it come with calibration weights?
A: No, calibration weights are not included. You will need to provide known weights for calibration.
Q: Can I use four load cells with this?
A: This kit includes one cell. For four cells, you need to wire them in a full bridge configuration to one HX711.
Q: Is there a Python library available?
A: Yes, there are multiple open-source libraries available for Raspberry Pi and Python.