A
Anonymous
Mar 13, 2026
Rating: 5/5
Reliable Data
Consistent readings under varying loads. Essential for our deformation testing protocols.
Description
High-Precision Full-Bridge Strain Gauge Module Bend Sensor for Rebar Deformation, Tensile Stress Detection, and Pressure Acquisition
Reviews
Attributes
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Sensor Configuration | Full-Bridge Wheatstone |
| Nominal Resistance | 350 Ohms |
| Sensitivity Factor | 2.0 ± 1% |
| Operating Temperature | -30°C to +80°C |
| Substrate Material | Phenolic Epoxy Resin |
| Grid Material | Constantan Alloy Foil |
| Connection Type | 4-Wire Terminal Interface |
| Strain Range | ±1500 Microstrain |
| Accuracy Grade | Class A Precision |
| Cable Length | 1.5 Meters Shielded |
5 reviews
A
Anonymous
Mar 11, 2026
Rating: 5/5
Excellent Stability
Used this for a bridge monitoring project. Noise levels are minimal and data is consistent over long periods.
A
Anonymous
Feb 07, 2026
Rating: 4/5
Good Quality
Solid build and accurate readings. Instructions could be clearer for beginners but overall satisfied.
A
Anonymous
Feb 07, 2026
Rating: 5/5
Easy to Integrate
Worked perfectly with my HX711 amplifier setup. Soldering points are well labeled.
A
Anonymous
Jan 24, 2026
Rating: 5/5
Great Value
Best price for this precision level. Arrived well packaged and protected.
5 FAQ
Q: Does this come pre-calibrated?
A: It is factory calibrated, but we recommend performing system calibration for your specific application.
Q: Is the sensor waterproof for outdoor use?
A: No, the module itself is not waterproof. We recommend applying an external coating for moisture protection.
Q: What is the maximum load this can measure?
A: This measures strain on the structure it is attached to, not direct load. Capacity depends on the host material.
Q: What excitation voltage is recommended for this module?
A: We recommend using a DC excitation voltage between 5V and 10V for optimal performance.
Q: Is this compatible with Arduino boards?
A: Yes, it is compatible when used with an instrumentation amplifier like the HX711.
![[Youxin Electronics] Soil Moisture Meter Detection Module, Soil Moisture Sensor for Intelligent Robot Cars](https://www.gosteppe.com/cache/medium/product/3877/legacy-main-eca7a3fa750966e5dca86bbf.webp)
![[Corrosion-Resistant] DFRobot Capacitive Soil Moisture Sensor Module Dry/Wet Detection](https://www.gosteppe.com/cache/medium/product/3259/legacy-main-2f0d3454b36b32391d263648.webp)
![[Damai Holds Micro-Needle Hair Transplant Patent] Precision Eyebrow Transplant – Custom Aesthetic Design](https://www.gosteppe.com/cache/small/product/269162/legacy-main-c1f4dd8da327a142f48d9814.webp)
![Xiankan Yunshu [Danran] Ceramic Brush Washer - Hand-Painted Elegant Lily Design under Glaze for Calligraphy Supplies](https://www.gosteppe.com/cache/small/product/269142/legacy-main-f8acbab3a83eee11ff108718.webp)
