Anonymous
Mar 22, 2026
Rating: 4/5
Easy to start with
As a beginner, I found the example code provided by the community very helpful. The module connects easily via jumper wires. Only wish it came with a header strip pre-soldered.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Sensors |
| Origin | - |
| Sensor Type | 6-Axis Motion Tracking (3-Axis Gyroscope + 3-Axis Accelerometer) |
| Chip Model | InvenSense MPU-6050 |
| Communication Interface | I2C (Inter-Integrated Circuit) |
| Operating Voltage | 3.3V - 5V DC |
| Gyro Range | ±250, ±500, ±1000, ±2000 °/sec |
| Accelerometer Range | ±2g, ±4g, ±8g, ±16g |
| ADC Resolution | 16-bit |
| Board Dimensions | 22mm x 17mm x 3mm |
| Mounting Holes | 4x M2.5 Standard Spacing |
| Compatibility | Arduino, STM32, Raspberry Pi, ESP32 |
Anonymous
Mar 22, 2026
Rating: 4/5
Easy to start with
As a beginner, I found the example code provided by the community very helpful. The module connects easily via jumper wires. Only wish it came with a header strip pre-soldered.
Anonymous
Mar 21, 2026
Rating: 4/5
Good value, clear documentation
Solid build quality and the pinout is clearly labeled. It took a little tweaking to get the calibration right, but once set up, the attitude readings are accurate enough for my balancing robot.
Anonymous
Mar 12, 2026
Rating: 5/5
Standard industry component
The MPU6050 is a classic for a reason. This Wildfire version implements it well with proper pull-up resistors on the board. Highly recommended for prototyping.
Anonymous
Mar 07, 2026
Rating: 5/5
Reliable and compact
Very compact form factor which helped save space on my custom flight controller board. No noise issues detected in the raw data streams.
Anonymous
Mar 06, 2026
Rating: 5/5
Excellent for university projects
Bought this for my final year project on self-balancing vehicles. The sensor responds quickly to movement changes. The library support for STM32 is a huge plus.
Anonymous
Mar 04, 2026
Rating: 5/5
Perfect for drone stabilization projects
This Wildfire module works flawlessly with my Arduino Uno. The I2C communication is stable, and the data output is consistent. Great for learning about IMU fusion algorithms.
Q: Does the package include mounting screws?
A: No, the package typically includes only the sensor module. Mounting screws (M2.5) need to be purchased separately based on your specific project enclosure requirements.
Q: Is there a built-in temperature sensor included?
A: Yes, the MPU-6050 chip includes an embedded temperature sensor that can be read via the same I2C interface, useful for compensating drift in gyroscope readings.
Q: Does this module work directly with 5V Arduino boards without a logic level converter?
A: Yes, the Wildfire MPU6050 module includes an onboard voltage regulator and is compatible with both 3.3V and 5V logic systems, so it can be connected directly to 5V Arduinos.
Q: Can I use this for high-speed racing drone applications?
A: While excellent for hobbyist and educational drones, professional high-speed racing drones often require higher sampling rates and specialized IMUs. However, this module is sufficient for most standard DIY quadcopters.
Q: What is the default I2C address for this sensor?
A: The default I2C address is 0x68. If the AD0 pin is pulled high, the address changes to 0x69, allowing you to use two sensors on the same bus.