Anonymous
Mar 25, 2026
Rating: 3/5
Works well but needs careful handling
The sensor works as described, but the wires are a bit thin. I had to reinforce the connections. Otherwise, the data reading is reliable.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Sensors |
| Origin | - |
| Operating Voltage | 3.3V - 5.5V DC |
| Output Signal | Analog (0-3V) |
| Measurement Range | 0 - 1000 ppm |
| Interface Type | GPIO / ADC |
| Probe Material | Stainless Steel 304 |
| Compatible MCU | STM32, Arduino, ESP32 |
| Working Temperature | 0°C to 60°C |
| Cable Length | 1.5 meters |
| Accuracy | ±10% of Full Scale |
| Package Includes | 1x TDS Module, 1x Probe, Jumper Wires |
Anonymous
Mar 25, 2026
Rating: 3/5
Works well but needs careful handling
The sensor works as described, but the wires are a bit thin. I had to reinforce the connections. Otherwise, the data reading is reliable.
Anonymous
Mar 24, 2026
Rating: 4/5
Solid performance
Using this to monitor my aquarium water quality. It responds quickly to changes in TDS levels. Just make sure to keep the probe clean for best results.
Anonymous
Mar 19, 2026
Rating: 5/5
Perfect for my hydroponics project
This sensor module works flawlessly with my STM32 board. The analog output is stable, and the provided source code helped me get started immediately. Great value for the price.
Anonymous
Mar 13, 2026
Rating: 5/5
Easy to integrate
I was worried about compatibility, but connecting this to my microcontroller was straightforward. The documentation included in the download link was clear.
Anonymous
Mar 13, 2026
Rating: 5/5
Excellent for prototyping
Bought five units for a university project. All of them performed consistently. The stainless steel probe is robust and suitable for long-term immersion.
Anonymous
Mar 06, 2026
Rating: 4/5
Good accuracy after calibration
Initially, the readings were a bit off, but after calibrating with standard solutions, it became very accurate. The build quality of the probe feels durable.
Q: What is the lifespan of the probe under continuous use?
A: Under normal conditions with regular cleaning, the probe typically lasts 1 to 2 years. Lifespan may vary depending on water corrosiveness and usage frequency.
Q: Is this sensor waterproof or just the probe?
A: The probe itself is waterproof and designed for immersion. However, the electronic module board is not waterproof and should be kept dry or housed in a protective enclosure.
Q: Where can I find the source code mentioned in the title?
A: A QR code and a download link are included in the product manual inside the box. You can also request the latest library version by contacting our support email.
Q: Does the package include the calibration solution?
A: No, the package includes the sensor module and probe only. Calibration solutions (1413 ppm and 12.88 mS/cm) need to be purchased separately for accurate tuning.
Q: Can I use this with a 5V Arduino Uno?
A: Yes, the module operates within 3.3V to 5.5V, so it is fully compatible with the 5V logic of an Arduino Uno. You can connect the AO pin directly to an analog input.