Anonymous
Mar 30, 2026
Rating: 5/5
Perfect upgrade for my Ender 3 V2
Installation was straightforward and took about 20 minutes. The print quality improved immediately with better temperature stability. The included belt is a nice bonus.
Description
Reviews
| Brand | - |
| Category | Root / Office Equipment, Supplies & Services |
| Origin | - |
| Compatibility | Ender 3 V2, Ender 3 Pro, Ender 3 |
| Voltage Rating | 24V DC |
| Heater Power | 40W |
| Nozzle Material | Brass |
| Included Nozzle Sizes | 0.4mm, 0.6mm, 0.8mm |
| Fan Type | 4010 Blower Fan |
| Thermistor Type | NTC 100K |
| Drive Gear | BMG Style Dual Drive |
| Belt Included | Yes, GT-2 Timing Belt |
| Package Contents | Hotend Assembly, 3 Nozzles, Fan Cover, Belt, Mounting Screws |
Anonymous
Mar 30, 2026
Rating: 5/5
Perfect upgrade for my Ender 3 V2
Installation was straightforward and took about 20 minutes. The print quality improved immediately with better temperature stability. The included belt is a nice bonus.
Anonymous
Mar 25, 2026
Rating: 4/5
Reliable performance
Been running this for two weeks without any issues. Temperature consistency is excellent. Would give 5 stars if the wiring harness was a bit longer.
Anonymous
Mar 08, 2026
Rating: 5/5
Great for upgrading older printers
Breathed new life into my old printer. The dual drive gear grips the filament much better now. No more slipping issues.
Anonymous
Mar 05, 2026
Rating: 5/5
Solid replacement part
My old hotend was clogging constantly. This full set solved the issue. The 40W heater heats up very quickly. Highly recommend for anyone needing a refresh.
Anonymous
Mar 05, 2026
Rating: 3/5
Decent but tight fit
The components seem high quality, but the fan cover was a bit difficult to snap into place. Once installed, everything works as expected.
Anonymous
Mar 04, 2026
Rating: 4/5
Good value kit
Works well overall. The fan is slightly louder than the stock one, but the cooling performance is much better for PLA prints. Instructions could be clearer.
Q: Do I need to update my firmware after installing this?
A: Generally, no firmware update is required as this is a direct hardware replacement with standard specifications. However, always ensure your PID settings are tuned.
Q: What is the maximum temperature this hotend can safely reach?
A: The brass nozzle and heater cartridge are rated for safe operation up to 260°C, suitable for PLA, PETG, and ABS.
Q: Does the package include the silicone sock for the hotend?
A: No, the silicone sock is not included in this specific kit. It must be purchased separately if needed.
Q: Is this compatible with the original Ender 3 non-Pro version?
A: Yes, this kit is fully compatible with the original Ender 3, Ender 3 Pro, and Ender 3 V2 models.
Q: Is the belt pre-cut to the correct length?
A: The belt included is a standard length that fits the Ender 3 series. You may need to adjust tension, but cutting is usually not necessary.