Anonymous
Mar 29, 2026
Rating: 4/5
Solid standard nozzles
Nothing fancy, just reliable brass nozzles that do the job. I use the 0.2mm version for miniatures and the detail is impressive. Would buy again.
Description
Reviews
| Brand | - |
| Category | Root / Office Equipment, Supplies & Services |
| Origin | - |
| Material | High-quality Brass |
| Nozzle Type | MK8 Threaded |
| Compatible Printers | Creality CR-8, CR-10/S/V2, Ender 3/3S/5/5S |
| Thread Size | M6 x 1mm |
| Orifice Diameter Options | 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm |
| Heat Resistance | Up to 300°C (572°F) |
| Package Quantity | 5 Pieces per Pack |
| Surface Finish | Polished and Deburred |
| Recommended Filament | PLA, ABS, PETG, TPU |
| Country of Origin | China |
Anonymous
Mar 29, 2026
Rating: 4/5
Solid standard nozzles
Nothing fancy, just reliable brass nozzles that do the job. I use the 0.2mm version for miniatures and the detail is impressive. Would buy again.
Anonymous
Mar 27, 2026
Rating: 4/5
Good quality, fast shipping
The brass quality seems solid. I upgraded from 0.4mm to 0.6mm for faster prints, and the flow is consistent. One nozzle had a tiny burr, but it was easy to clean off.
Anonymous
Mar 21, 2026
Rating: 5/5
Great price point
You can't beat the price for five nozzles. I keep a set in my toolkit for every printer I own. No issues with heating or extrusion consistency.
Anonymous
Mar 06, 2026
Rating: 5/5
Perfect fit for my Ender 3
These nozzles fit perfectly on my Ender 3 V2. The threading is smooth, and I haven't experienced any leaks since installation. Great value for a 5-pack.
Anonymous
Mar 03, 2026
Rating: 5/5
Easy to install for beginners
I was nervous about changing my nozzle, but these screwed in easily with the provided wrench. My print quality improved immediately after replacing my old worn-out nozzle.
Anonymous
Mar 02, 2026
Rating: 5/5
Essential spare parts
Every 3D printer owner should have a pack of these. They are cheap insurance against clogs. Works flawlessly with PLA and PETG on my CR-10 S5.
Q: What is the maximum temperature these brass nozzles can handle?
A: These brass nozzles are rated for temperatures up to 300°C (572°F), making them suitable for PLA, ABS, PETG, and TPU filaments. For higher temperature materials like Polycarbonate, we recommend hardened steel nozzles.
Q: Does the package include different sizes or are they all the same?
A: You can select specific sizes (e.g., all 0.4mm) or mixed packs depending on the option you choose at checkout. Please check the size selector before adding to your cart.
Q: Do I need PTFE tape when installing these?
A: No, PTFE tape is not required. The MK8 nozzles are designed to create a metal-to-metal seal when tightened properly against the heat break. Using tape can actually interfere with the seal.
Q: How often should I replace my brass nozzle?
A: It depends on usage and filament type. Abrasive filaments like carbon fiber or glow-in-the-dark will wear out brass nozzles quickly (sometimes in one spool). For standard PLA, a nozzle can last for many months or even years. Replace it if you notice inconsistent extrusion or widening of the hole.
Q: Are these nozzles compatible with the Ender 3 Pro?
A: Yes, the MK8 threaded nozzles are fully compatible with the Ender 3 Pro, as well as the standard Ender 3, Ender 3S, and other Creality models listed.