Anonymous
Apr 11, 2026
Rating: 5/5
Excellent Mist Quality
Works great for our mining site dust control. The fog is very fine and does not wet the surface too much.
Description
Reviews
| Brand | - |
| Category | 3D Printing Accessories / Hot End and Nozzle |
| Origin | - |
| Material | 304 Stainless Steel |
| Connection Type | 1/4 Inch NPT |
| Operating Water Pressure | 0.3 - 0.5 MPa |
| Operating Air Pressure | 0.4 - 0.6 MPa |
| Water Flow Rate | 8 - 12 Liters/Hour |
| Spray Angle | 60 Degrees |
| Mean Droplet Size | 20 - 40 Microns |
| Maximum Temperature | 100°C |
| Product Weight | 0.3 kg |
| Country of Origin | China |
Anonymous
Apr 11, 2026
Rating: 5/5
Excellent Mist Quality
Works great for our mining site dust control. The fog is very fine and does not wet the surface too much.
Anonymous
Mar 02, 2026
Rating: 5/5
Effective Cooling
Reduced workshop temperature noticeably. Easy to integrate into our existing air lines.
Anonymous
Feb 17, 2026
Rating: 4/5
Good Value
Does the job but requires precise pressure tuning to get the optimal spray pattern.
Anonymous
Feb 12, 2026
Rating: 3/5
Installation Tricky
Thread size was slightly tight but works now. Make sure you have the right wrench.
Anonymous
Feb 10, 2026
Rating: 5/5
Durable Build
Stainless steel holds up well in humid conditions. No signs of corrosion after three months.
Q: Can I use this for fogging only?
A: It is designed for two-fluid mixing, air is required.
Q: What is the air consumption?
A: Approximately 0.5 NM3/h per nozzle.
Q: Is there a warranty?
A: Yes, includes a 1-year manufacturer warranty.
Q: Can it handle hot water?
A: Yes, up to 100°C continuously.
Q: Does this require filtered water?
A: Yes, we recommend 50-micron filtration to prevent clogging.