Anonymous
Mar 26, 2026
Rating: 4/5
Good value but requires slow feed
Works well on pine and MDF. You have to feed it slowly to avoid burning the wood, but the result is very smooth once you get the technique down.
Description
Reviews
| Brand | - |
| Category | Root / Home Furniture |
| Origin | - |
| Material | Tungsten Steel Alloy |
| Cutting Angle | 90 Degrees (3-Flute) / 45 Degrees (1-Flute) |
| Shank Type | Straight Shank |
| Coating | Titanium Nitride (TiN) |
| Compatibility | Standard Electric Drills and Drill Presses |
| Application | Wood, Plastic, and Soft Metal Chamfering |
| Flute Count | Three-Flute and Single-Flute Options |
| Hardness | HRC 65-68 |
| Package Contents | 1x Chamfering Cutter Bit |
| Finish | Polished and Precision Ground |
Anonymous
Mar 26, 2026
Rating: 4/5
Good value but requires slow feed
Works well on pine and MDF. You have to feed it slowly to avoid burning the wood, but the result is very smooth once you get the technique down.
Anonymous
Mar 26, 2026
Rating: 3/5
Decent but shank slipped once
The cutting performance is good, but I had to tighten my drill chuck extra hard because the smooth shank slipped slightly under high torque.
Anonymous
Mar 17, 2026
Rating: 5/5
Great for DIY furniture repair
I bought this to fix some damaged edges on an old table. The tungsten steel held up great against the hard maple wood without dulling.
Anonymous
Mar 06, 2026
Rating: 5/5
Perfect for my woodworking projects
This cutter bit made quick work of chamfering the edges on my new oak bookshelf. The 90-degree angle was exactly what I needed for a clean finish.
Anonymous
Mar 04, 2026
Rating: 5/5
Sharp out of the box
Impressed with the sharpness immediately upon arrival. Used it to counterbore several holes for furniture assembly screws and it performed flawlessly.
Anonymous
Mar 02, 2026
Rating: 5/5
Professional results at home
As a hobbyist making custom cabinets, this tool gives me professional-looking edge details. The 45-degree single flute option is particularly versatile.
Q: Is this suitable for cutting hardened steel?
A: No, this bit is designed for wood, plastics, and soft non-ferrous metals like aluminum. It is not intended for hardened steel.
Q: Does it come with a storage case?
A: This item typically ships in a protective plastic sleeve. A hard storage case is not included in the standard package.
Q: What is the exact shank diameter?
A: The shank diameter is 1/4 inch (6.35mm), which fits most standard collets and chucks.
Q: How do I prevent tear-out when using this on plywood?
A: For best results on plywood, make a shallow scoring pass first before doing the full depth cut, and ensure your feed rate is steady and moderate.
Q: Can this bit be used in a standard handheld power drill?
A: Yes, as long as your drill has a chuck that can accommodate the shank diameter of this bit, it will work perfectly.