Anonymous
Mar 25, 2026
Rating: 5/5
Reliable and fast shipping
Arrived earlier than expected. The board boots up instantly and the onboard LEDs are useful for debugging. No issues with the flash memory capacity.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Development, Learning, Evaluation & Industrial Control Boards |
| Origin | - |
| Microcontroller | STM32F407ZGT6 |
| Core Architecture | ARM Cortex-M4 |
| Max Frequency | 168 MHz |
| Flash Memory | 1 MB |
| SRAM | 192 KB |
| GPIO Pins | 112 Fast I/O |
| Communication Interfaces | USB OTG, Ethernet, CAN, SPI, I2C, UART |
| Debug Interface | JTAG/SWD |
| Power Supply | 5V via USB or External Header |
| Board Dimensions | 100mm x 100mm |
Anonymous
Mar 25, 2026
Rating: 5/5
Reliable and fast shipping
Arrived earlier than expected. The board boots up instantly and the onboard LEDs are useful for debugging. No issues with the flash memory capacity.
Anonymous
Mar 22, 2026
Rating: 4/5
Good starter kit
Very comprehensive board with lots of peripherals. The USB OTG feature is a nice bonus. Took off one star because the included USB cable was a bit short.
Anonymous
Mar 19, 2026
Rating: 5/5
Robust industrial control solution
Using this for a prototype industrial controller. The CAN bus implementation is stable, and the voltage regulation handles noise well. Highly recommended.
Anonymous
Mar 11, 2026
Rating: 5/5
Excellent board for embedded projects
This STM32F407 board is fantastic. The pinout is clearly labeled, and the build quality feels very solid. I successfully ported my FreeRTOS project within a day.
Anonymous
Mar 08, 2026
Rating: 5/5
Perfect for learning ARM Cortex-M4
I bought this for my university course. It works flawlessly with Keil MDK and STM32CubeIDE. The Ethernet peripheral worked right out of the box.
Anonymous
Mar 03, 2026
Rating: 4/5
Great value but documentation could be better
Hardware is top-notch for the price. The only downside is that the schematic provided in the download link was slightly outdated, but community forums helped me resolve it quickly.
Q: Does this board support MicroPython?
A: Yes, the STM32F407ZGT6 chip is fully compatible with MicroPython. You will need to flash the appropriate firmware binary using a programmer like ST-Link.
Q: Does the package include a case or enclosure?
A: No, this package includes only the development board and a USB cable. Enclosures must be purchased separately or 3D printed using the dimensions provided in the datasheet.
Q: What debugger do you recommend for this kit?
A: We recommend using the ST-Link V2 or V3 debugger, which connects via the standard SWD header on the board. It is widely supported by most IDEs.
Q: Can I use this board with Arduino IDE?
A: Yes, you can use the Arduino IDE by installing the STM32duino board package. Select the 'Generic STM32F4 series' and choose the correct variant for ZGT6.
Q: Is the 5V power input protected against reverse polarity?
A: The board includes basic protection, but we strongly advise double-checking your power supply connections before powering on to prevent any potential damage.