Anonymous
Mar 31, 2026
Rating: 5/5
Exceeded expectations
I was worried about compatibility with my existing HATs, but the 40-pin header works perfectly. The board stays cool even under continuous load without a fan.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Development, Learning, Evaluation & Industrial Control Boards |
| Origin | - |
| Processor | NXP i.MX6ULL Cortex-A7 up to 900MHz |
| Memory | 512MB DDR3 SDRAM |
| Storage Options | 4GB eMMC or 256MB NAND Flash |
| Operating System | Linux (Ubuntu, Debian, Buildroot supported) |
| Connectivity | 10/100Mbps Ethernet, Wi-Fi/BT module ready |
| Display Interface | RGB LCD interface (up to 1024x600) |
| Expansion Headers | 2x 40-pin GPIO headers compatible with Raspberry Pi |
| Power Supply | 5V DC via Micro-USB or Type-C |
| Dimensions | 55mm x 40mm |
| Working Temperature | -20°C to +70°C |
Anonymous
Mar 31, 2026
Rating: 5/5
Exceeded expectations
I was worried about compatibility with my existing HATs, but the 40-pin header works perfectly. The board stays cool even under continuous load without a fan.
Anonymous
Mar 27, 2026
Rating: 4/5
Good kernel support
Mainline Linux kernel support is decent. Had to tweak the device tree slightly for a specific sensor, but the process was straightforward. Boot time is impressively fast with eMMC.
Anonymous
Mar 20, 2026
Rating: 5/5
Bought ten for our lab
Equipped our entire robotics lab with these. They handle Python scripts and OpenCV reasonably well for basic vision tasks. The form factor is compact enough for mobile robots.
Anonymous
Mar 16, 2026
Rating: 4/5
Solid performance for prototyping
We used this for a quick industrial control prototype. The GPIO pins are robust, and the Ethernet connection is stable. Only wish it had Gigabit Ethernet, but for the cost, it's hard to complain.
Anonymous
Mar 10, 2026
Rating: 5/5
Perfect for embedded Linux learning
This board is exactly what I needed to transition from Arduino to full Linux development. The documentation is clear, and the pre-flashed image booted immediately. Great value for the price.
Anonymous
Mar 09, 2026
Rating: 5/5
Great community support
As a student, I found the online forums very helpful when setting up the cross-compilation environment. The hardware feels durable and the pinout is clearly labeled on the silkscreen.
Q: Can I run Android on this IMX6ULL board?
A: While the i.MX6ULL processor technically supports Android, this specific board is optimized for Linux distributions like Ubuntu and Debian. Android images are not officially provided or supported.
Q: What is the difference between the EMMC and NAND versions?
A: The eMMC version offers faster read/write speeds and higher reliability for frequent writes, making it better for OS execution. The NAND version is more cost-effective but may require bad block management in software.
Q: How do I access the serial console for debugging?
A: You can access the serial console via the debug UART pins located on the expansion header. Use a USB-to-TTL adapter set to 3.3V logic level with 115200 baud rate.
Q: Does this board come with a power adapter included?
A: No, the package includes only the core board. You will need to provide your own 5V/2A power supply with a Micro-USB or Type-C connector.
Q: Is there a CSI camera interface available?
A: Yes, the board features a MIPI-CSI interface. However, you may need to purchase a compatible camera module separately and configure the driver in the device tree.