Anonymous
Apr 14, 2026
Rating: 5/5
Fast Shipping
Arrived earlier than expected. Well protected packaging ensured no damage during transit.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Core Architecture | ARM Cortex-M3 32-bit RISC |
| Flash Memory | 64 KB |
| SRAM Capacity | 20 KB |
| Max Clock Frequency | 72 MHz |
| Operating Voltage | 3.3V |
| GPIO Pins | 37 Programmable I/O Lines |
| Communication Interfaces | USART, SPI, I2C, CAN, USB |
| PCB Finish | Immersion Gold |
| Board Dimensions | 53mm x 23mm x 10mm |
| Package Content | 1 x STM32F103C8T6 Board, 1 x Pin Header Set |
Anonymous
Apr 14, 2026
Rating: 5/5
Fast Shipping
Arrived earlier than expected. Well protected packaging ensured no damage during transit.
Anonymous
Mar 27, 2026
Rating: 5/5
Stable Performance
Using it for a sensor project. Very stable power regulation and no overheating issues.
Anonymous
Mar 17, 2026
Rating: 5/5
Excellent Starter Board
Works great for learning embedded systems. The gold finish is a nice touch and ensures good connectivity.
Anonymous
Feb 06, 2026
Rating: 5/5
Compatible with Arduino IDE
Uploaded sketches without issues using STM32duino. Great for those transitioning from Arduino.
Anonymous
Jan 31, 2026
Rating: 4/5
Good Value
Board works well but headers require soldering. Make sure you have a soldering iron ready.
Q: Does it support 5V logic?
A: Most GPIO pins are 5V tolerant but operate at 3.3V logic levels.
Q: What USB cable is needed?
A: It requires a standard Micro USB cable for power and data.
Q: Can I use ST-Link?
A: Yes, you can use ST-Link V2 for programming and debugging via SWD.
Q: Is bootloader preinstalled?
A: Usually no, you may need to upload the bootloader via SWD first.
Q: Can it drive motors?
A: Not directly. You should use a motor driver module with this board.