Anonymous
Apr 09, 2026
Rating: 4/5
Good but needs patience
Great hardware, but driver installation took some time on Windows. Once set up, it works well.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Chip Model | ESP32-C3 |
| Wireless Connectivity | 2.4 GHz WiFi & Bluetooth 5 (LE) |
| CPU Frequency | 160 MHz |
| Flash Memory | 4 MB |
| SRAM | 400 KB |
| Operating Voltage | 3.3V |
| USB Interface | USB Type-C |
| GPIO Pins | 22 Programmable Pins |
| ADC Resolution | 12-bit |
| Compatibility | Arduino IDE, ESP-IDF, MicroPython |
Anonymous
Apr 09, 2026
Rating: 4/5
Good but needs patience
Great hardware, but driver installation took some time on Windows. Once set up, it works well.
Anonymous
Apr 05, 2026
Rating: 5/5
Perfect for prototyping
This board works exactly as described. WiFi connectivity is stable and the USB-C port is convenient.
Anonymous
Mar 21, 2026
Rating: 5/5
Reliable for production tests
We used these to verify chip functionality before ordering bulk. No failures so far.
Anonymous
Mar 01, 2026
Rating: 5/5
Low power usage
Excellent for battery projects. The deep sleep mode works perfectly with BLE.
Anonymous
Feb 17, 2026
Rating: 3/5
Pinout diagram unclear
The board works fine, but the silkscreen labeling is a bit small and hard to read.
Q: What USB cable is included?
A: A USB Type-C to Type-A cable is included in the package.
Q: Is the bootloader pre-installed?
A: Yes, the board comes with a bootloader ready for programming.
Q: Does this support 5GHz WiFi?
A: No, the ESP32-C3 only supports 2.4 GHz WiFi networks.
Q: Can I power this via VIN pin?
A: Yes, but ensure the voltage is regulated to 3.3V to avoid damage.
Q: Does it support Bluetooth Classic?
A: No, this module supports Bluetooth Low Energy (BLE) only.