Anonymous
Apr 15, 2026
Rating: 5/5
Perfect for my aquarium project
Works exactly as described. Very stable readings over the last week.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Pressure Range | 0-40 kPa |
| Output Signal | 0.5-4.5V ratiometric |
| Supply Voltage | 5V DC ±0.25V |
| Accuracy | ±0.5% FS |
| Operating Temperature | -20°C to 85°C |
| Media Compatibility | Non-corrosive gases and liquids |
| Port Type | Barbed nipple for 6mm ID tubing |
| Housing Material | PPS and Stainless Steel |
| PCB Dimensions | 25mm x 15mm x 10mm |
| Compliance | RoHS Compliant |
Anonymous
Apr 15, 2026
Rating: 5/5
Perfect for my aquarium project
Works exactly as described. Very stable readings over the last week.
Anonymous
Apr 02, 2026
Rating: 4/5
Good sensor, tricky wiring
Accuracy is great but the pinout diagram could be clearer for beginners.
Anonymous
Mar 15, 2026
Rating: 5/5
Great value
Cheaper than competitors with similar specs. Fast shipping and well packaged.
Anonymous
Feb 23, 2026
Rating: 5/5
Reliable industrial grade
Using this for tank monitoring. No drift after 2 months of continuous use.
Anonymous
Jan 22, 2026
Rating: 4/5
Works well for water depth
Calibrated easily with Arduino. Sensitive to temperature changes but manageable.
Q: Can it measure saltwater?
A: Recommended for fresh water only. Saltwater may corrode the port over time.
Q: Is calibration needed out of the box?
A: Pre-calibrated, but system-level calibration is recommended for high precision.
Q: Does this work with 3.3V logic?
A: The sensor runs on 5V, but output is compatible with 3.3V ADCs.
Q: Does it come with tubing?
A: No, tubing must be purchased separately to fit the barbed nipple.
Q: What is the response time?
A: Typically less than 1ms for step change in pressure.