Anonymous
Mar 11, 2026
Rating: 5/5
Perfect for Arduino
Works flawlessly with the IRremote library. Very sensitive and picks up signals from across the room.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Model Number | VS1838B / HX1838 |
| Operating Voltage | 2.7V - 5.5V DC |
| Carrier Frequency | 38 kHz |
| Operating Temperature | -25°C to +85°C |
| Pin Count | 3 Pins |
| Package Style | Through Hole |
| Reception Angle | ±30 Degrees |
| Compatible Platforms | Arduino, Raspberry Pi, ESP32 |
| Module Dimensions | 10 x 6 x 5 mm |
| Item Weight | 0.5 g |
Anonymous
Mar 11, 2026
Rating: 5/5
Perfect for Arduino
Works flawlessly with the IRremote library. Very sensitive and picks up signals from across the room.
Anonymous
Mar 05, 2026
Rating: 5/5
Great little sensor
Used it for my TV control project. Range is impressive and wiring was straightforward.
Anonymous
Feb 21, 2026
Rating: 4/5
Good quality
One leg was bent on arrival but straightened easily. Works well once connected properly.
Anonymous
Feb 11, 2026
Rating: 5/5
Reliable component
Been using these for months in my home automation setup. No failures so far.
Anonymous
Jan 28, 2026
Rating: 5/5
Fast shipping
Product matches description exactly. Easy to solder onto a breakout board for testing.
Q: What library do you recommend?
A: The IRremote library by shirriff is commonly used and works well with this module.
Q: Is a remote control included?
A: No, this listing is for the receiver module only. You will need your own IR remote.
Q: Does this work with 3.3V logic?
A: Yes, it supports 2.7V to 5.5V so it is compatible with 3.3V systems.
Q: What is the pinout order?
A: Facing the front of the module, pins are typically GND, VCC, OUT from left to right.
Q: Can I use this outdoors?
A: It is best used indoors as direct sunlight can interfere with IR signal reception.