Anonymous
Apr 06, 2026
Rating: 5/5
Great for DIY projects
Used this with an Arduino setup. The logic levels are consistent and the relay clicks loudly enough to know it's engaging.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | 5V DC / 12V DC (Selectable) |
| Relay Contact Capacity | 10A 250VAC / 10A 30VDC |
| Sensor Probe Cable Length | 2 Meters |
| PCB Dimensions | 65mm x 45mm x 15mm |
| Indicator LEDs | 4x Status Indicators (Power, Low, High, Overflow) |
| PCB Material | FR-4 Fiberglass Double Sided |
| Operating Temperature | -20°C to 60°C |
| Standby Current | < 50mA |
| Control Mode | Automatic High/Low Level Detection |
| Package Weight | 150 Grams |
Anonymous
Apr 06, 2026
Rating: 5/5
Great for DIY projects
Used this with an Arduino setup. The logic levels are consistent and the relay clicks loudly enough to know it's engaging.
Anonymous
Apr 06, 2026
Rating: 5/5
Perfect for my rooftop tank
Installed this last week and it works flawlessly. The pump turns on exactly when needed and shuts off when full. Very happy with the purchase.
Anonymous
Mar 20, 2026
Rating: 3/5
Probes could be better quality
The controller board is fine, but the sensor wires feel a bit thin. Might replace them with stainless steel probes later.
Anonymous
Mar 14, 2026
Rating: 4/5
Good value but wiring needs care
The module itself is solid. Just make sure you follow the diagram closely for the relay connections. Works well otherwise.
Anonymous
Mar 05, 2026
Rating: 5/5
Saves so much water
No more overflow issues. The automatic shut-off is reliable. Highly recommend for home reservoirs.
Q: What is the maximum pump power supported?
A: The relay supports up to 10A, so please check your pump's current draw before connecting directly.
Q: Does this come with the sensor probes?
A: Yes, the kit includes standard water level sensor probes with 2-meter cables.
Q: Can I use this with a 24V power supply?
A: No, this module is designed strictly for 5V or 12V DC input. Using 24V may damage the circuit.
Q: Is the circuit board waterproof?
A: No, the PCB should be housed in a waterproof enclosure; only the probes are water-resistant.
Q: How many water levels can it detect?
A: It typically supports 4 levels: Common, Low, High, and Overflow.