Anonymous
Mar 23, 2026
Rating: 5/5
Reliable analog output
No noise issues on the line. Good build quality on the probe. Suitable for embedded systems development.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Output Signal | Analog Voltage (0-2.3V) |
| Power Supply | 3.3V - 5.5V DC |
| Interface Type | PH2.0-3Pin Connector |
| Probe Material | Food Grade Titanium Alloy |
| TDS Measurement Range | 0 - 1000 ppm |
| Accuracy | ±10% (depending on calibration) |
| Operating Temperature | 0°C to 50°C |
| MCU Compatibility | Arduino, STM32, 51 Series |
| Probe Cable Length | 1.5 Meters |
| PCB Dimensions | 60mm x 20mm |
Anonymous
Mar 23, 2026
Rating: 5/5
Reliable analog output
No noise issues on the line. Good build quality on the probe. Suitable for embedded systems development.
Anonymous
Feb 25, 2026
Rating: 3/5
Needs careful calibration
Works but instructions could be clearer on calibration solution. Had to look up tutorials online to get accurate readings.
Anonymous
Feb 08, 2026
Rating: 5/5
Great for IoT Projects
Works well with my ESP32 setup. Calibration needed but straightforward. The analog output is stable enough for logging data.
Anonymous
Jan 29, 2026
Rating: 5/5
Perfect for university project
Compatible with STM32 as described. Analog output is stable and easy to read with ADC. Good value for the price.
Anonymous
Jan 24, 2026
Rating: 4/5
Good for hydroponics monitoring
Using it to monitor nutrient levels in my indoor garden. Readings are consistent after calibration. Would prefer a longer cable.
Q: Can I use this with Arduino Uno?
A: Yes, it works with any board that has an analog input pin and supports 3.3V to 5V logic.
Q: How often should I calibrate?
A: We recommend calibration every few months depending on usage frequency and environment.
Q: Does it come with calibration powder?
A: No, calibration solution is sold separately. You will need a standard TDS calibration solution.
Q: What is the maximum voltage input?
A: Please do not exceed 5.5V to avoid damaging the module. 5V is the recommended standard.
Q: Is this sensor waterproof?
A: The probe is waterproof and can be submerged, but the module PCB is not. Keep the board dry.