Anonymous
Apr 06, 2026
Rating: 5/5
Bulk order quality
Bought 10 for our club. All units functioning correctly.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Sensor Type | Ambient Light Photodiode |
| Output Signal | Analog Voltage |
| Operating Voltage | 3.3V - 5V DC |
| Wavelength Range | 400nm - 700nm |
| Response Time | < 50 microseconds |
| Interface Type | 3-Pin Header (VCC, GND, OUT) |
| PCB Size | 32mm x 14mm |
| Mounting Holes | 2x 3mm Diameter |
| Compatibility | Arduino, Raspberry Pi, ESP32 |
| Weight | 5 grams |
Anonymous
Apr 06, 2026
Rating: 5/5
Bulk order quality
Bought 10 for our club. All units functioning correctly.
Anonymous
Mar 29, 2026
Rating: 5/5
Reliable component
Used this for an automatic night light project. Very stable readings.
Anonymous
Mar 13, 2026
Rating: 4/5
Good sensitivity
Sensitivity is good but needed to adjust potentiometer slightly.
Anonymous
Feb 09, 2026
Rating: 5/5
Great for Arduino projects
Works perfectly with my Uno. Easy to read analog values.
Anonymous
Feb 02, 2026
Rating: 3/5
Documentation could be better
Sensor works but wiring diagram was a bit unclear for beginners.
Q: How do I connect this to Raspberry Pi?
A: You need an ADC converter since Pi GPIOs are digital only.
Q: What is the maximum lux range?
A: It is designed for ambient light, typically up to 1000 Lux.
Q: Can I use this outdoors?
A: It is not waterproof. Please enclose it if used outside.
Q: Does this work with 3.3V logic?
A: Yes, it operates between 3.3V and 5V.
Q: Is there a digital output pin?
A: No, this module provides only an analog output signal.