Anonymous
Mar 23, 2026
Rating: 4/5
Good sensor, minor docs issue
Accuracy is great but the AT command list could be more detailed in the datasheet.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | 3.3V to 5.0V DC |
| Communication Protocol | Modbus RTU & AT Commands |
| Magnetic Sensing Range | ±2000 Gauss |
| Output Interface | UART / TTL Logic |
| PCB Length | 25.4 mm |
| PCB Width | 15.2 mm |
| Operating Temperature | -40°C to 85°C |
| Current Consumption | 12mA (Active) |
| Connector Pitch | 2.54mm Header |
| Package Weight | 8 grams |
Anonymous
Mar 23, 2026
Rating: 4/5
Good sensor, minor docs issue
Accuracy is great but the AT command list could be more detailed in the datasheet.
Anonymous
Feb 16, 2026
Rating: 5/5
Perfect for IoT projects
Works flawlessly with my ESP32 setup. Modbus implementation is stable and easy to configure.
Anonymous
Feb 03, 2026
Rating: 5/5
Great value for money
Cheap and effective. The bare PCB makes it easy to integrate into custom housings.
Anonymous
Jan 19, 2026
Rating: 3/5
Needs external pull-ups
Works well but remember to add pull-up resistors on the UART lines for long runs.
Anonymous
Jan 18, 2026
Rating: 5/5
Reliable magnetic detection
Used this for a speed counter application. Very consistent readings over time.
Q: How do I calibrate the zero point?
A: Send the AT ZERO command while away from magnetic fields to reset the baseline.
Q: Does it support I2C?
A: This model supports UART Modbus and AT commands. I2C is not available on this version.
Q: What is the default baud rate?
A: The default baud rate is 9600bps. You can change it via AT commands.
Q: Is this waterproof?
A: No, this is a bare PCB module and should be enclosed for protection against moisture.
Q: Can I power it with 3.3V?
A: Yes, the operating voltage range includes 3.3V logic levels.