Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Sensors |
| Origin | - |
| Operating Voltage | 3.3V - 5V DC |
| Output Type | Digital Switch Output (0 and 1) |
| Analog Output | Yes, 0-255 gradient value |
| PCB Size | 3.2cm x 1.4cm |
| Indicator LED | Power LED and Digital Switch Output LED |
| Comparator Chip | LM393 Wide Voltage Comparator |
| Sensitivity Adjustment | Adjustable via potentiometer |
| Application | Soil moisture detection, automatic watering systems |
| Connector Type | 3-pin PH2.0 interface |
| Material | FR-4 PCB with gold-plated probes |
Anonymous
Mar 29, 2026
Rating: 5/5
Excellent for learning electronics
Bought this for a university project on IoT agriculture. The documentation online is plentiful, and the module itself is robust. The LM393 comparator makes the logic very stable.
Anonymous
Mar 28, 2026
Rating: 5/5
Works great with Raspberry Pi
Connected this to a Raspberry Pi via an ADC converter. The readings are consistent and allow me to log soil humidity data over time. Very happy with the purchase.
Anonymous
Mar 17, 2026
Rating: 4/5
Good value but probes need care
Great little module for the price. It detects moisture changes instantly. Just remember to wipe the probes clean after long-term use in soil to prevent corrosion, or consider coating them if using permanently outdoors.
Anonymous
Mar 14, 2026
Rating: 4/5
Reliable for prototyping
We use these in our makerspace for various student projects. They are durable enough for repeated insertion into soil boxes. Only giving 4 stars because the included wires are a bit short for some setups.
Anonymous
Mar 13, 2026
Rating: 5/5
Saved my indoor plants
I built a simple automatic watering system using this sensor and a peristaltic pump. It has kept my houseplants alive while I was on vacation. The sensitivity adjustment is very responsive.
Anonymous
Mar 02, 2026
Rating: 5/5
Perfect for my Arduino project
This sensor works flawlessly with my Arduino Uno. The analog output gives great granularity for measuring soil dampness, and the digital threshold is easy to set with the onboard potentiometer. Highly recommended for DIY smart garden kits.
Q: How do I calibrate the sensitivity of the sensor?
A: There is a blue potentiometer on the back of the PCB. Insert the sensor into dry soil and turn the screw until the digital LED just turns off. Then, insert it into wet soil; the LED should turn on. This sets your threshold.
Q: Is this sensor waterproof for outdoor permanent installation?
A: The electronic components on the PCB are not waterproof. While the metal probes are resistant to rust, we recommend coating the PCB with conformal coating or placing it in a waterproof enclosure if used outdoors permanently.
Q: Does this module provide an analog reading or just a yes/no signal?
A: It provides both! The DO (Digital Output) pin gives a high/low signal based on your threshold setting, while the AO (Analog Output) pin provides a variable voltage representing the exact moisture level, which can be read by an ADC.
Q: Can this sensor be used directly with a 12V power supply?
A: While the product title mentions 12V compatibility in certain kit configurations, the sensor module itself operates best at 3.3V to 5V. If you are using a 12V system, please ensure you use a voltage regulator or a compatible driver circuit to protect the sensor.
Q: What is the lifespan of the metal probes in acidic soil?
A: In highly acidic or saline soils, the exposed metal probes may corrode over several months of continuous exposure. For long-term projects, we suggest checking them periodically or applying a protective conductive coating.
Milang P-Series Magnetic Induction Angular Displacement Sensor - High-Precision, Wear-Free Angle and Position Measurement
$100.00
Raspberry Pi 4 Finned Case with Dedicated Aluminum Alloy Striped Heat Sink and Fan
$94.00
UV Sensor, Ultraviolet Detector, Illuminance and Sunlight Transmitter, UV Intensity Tester and Monitor
$122.00
Portable 4-in-1 Gas Detector for Tunnels and Utility Corridors High Sensitivity Multi-Toxic Gas Explorer
$175.00
UV Sensor UV Detector Illuminance Sunlight Transmitter UV Intensity Tester Monitor
$129.00
Milang PX Series Magnetic Induction Angular Displacement Sensor High-Precision Wear-Free Angle Position Sensor
$473.00
S12SD UV Sensor Module Sunlight Intensity Detection Sensor UV High Sensitivity
$18.10
UV Sensor and Detector for Sunlight Intensity Monitoring, Illuminance Transmitter, Factory Direct, RS485
$46.80
Custom Explosive-Proof Gas Detector for Combustible Gas, CO, H2, and O2 Concentration Alarm with Sensitive Sensor
$806.00
USB PC Serial Display UV Sensor Outdoor Solar UV Intensity Display Module
$158.20
Photoresistor Relay Control Module / Light-Controlled Switch / Dark-Sensing Module 24V
$40.00
UV Radiation Sensor Transmitter RS485 Solar Light Intensity UV Index Detector
$182.00
Premium HW-322B Indium Antimonide Linear Hall Element - Current Sensor and Magnetic Field Detector
$6.50
Sulfur Dioxide Gas Sensor O Electrochemical Industrial Toxic Gas Detection Probe Alarm Sensing Element
$695.00
Hall Effect Sensor Relay Module, Magnetic Switch for Magnetic Field Sensing, Smart Door/Window Alarm Control
$6.80
Photoresistor Relay Sensor Control Module 24V - Light-Controlled Switch and Dark-Sensing Module
$35.20
UV Sensor UV Detector Illuminance Sunlight Transmitter UV Intensity Tester Measurement Monitor
$104.00
49E Linear Hall Sensor Module for Magnetic Field Detection with PH2.0 Interface for Electronic Building Blocks
$7.35
SO2 Sulfur Dioxide Gas Sensor Electrochemical Industrial Toxic Gas Detector Alarm
$630.00
49E Linear Hall Sensor Module Magnetic Field Induction Switch Board DIY Electronic Building Blocks
$2.53
Photoresistor Relay Sensor Control Module, Light-Controlled Switch, No-Light Sensing Module, 12V
$40.00
S12SD UV Sensor Module - High-Sensitivity Sunlight Intensity and UV Radiation Detector
$25.90
Honeywell SS39ET SS49E SOT-23 TO-92S Linear Hall Effect Sensor Magnetic Field
$8.00
Raspberry Pi 5 Development Board 2G/4G/8G/16G Motherboard
$1,572.00
EQ-730L High-Sensitivity Linear Hall Current Sensor for Magnetic Field Detection and Limit Measurement
$8.25
UV Sensor RS485 Illuminance Transmitter UV Monitor and Solar Radiation Detector
$376.50
Waveshare Raspberry Pi 4 Dedicated Industrial DIN Rail Enclosure Aluminum Alloy Case with Cooling Fan/Heatsink
$95.10
Photoresistor Sensor Module, Automatic Brightness Control, DC 5V/12V Light-Controlled Relay, Light Switch Sensor
$15.10
Raspberry Pi 4 Model B 8G/4G Development Board, Raspberry Pi 4B & Pi 5 Motherboard for Programming and AI Kits
$570.00
Aluminum Alloy DIN Rail Case for Raspberry Pi 4 with Matching Cooling Fan and Heatsink Large Internal Space
$96.80
Free Shipping
Enjoy free shipping on all orders
Product Replace
Easy Product Replacement Available!
Emi Available
No cost EMI available on all major credit cards
24/7 Support
Dedicated 24/7 support via chat and email
![[Wireless] Strain Gauge Acquisition Module RS485 Transmitter High-Precision Full-Bridge Pressure Sensor Collector](https://www.gosteppe.com/cache/medium/product/75041/legacy-main-09d64f9b78df00a695ae75fe.webp)
