A
Anonymous
Mar 24, 2026
Rating: 4/5
Good quality for the price
I use it regularly and the performance has been stable so far.
Description
FSR402 Resistive Thin-Film Pressure Sensor Specializing in Components for 22 Years
Reviews
Attributes
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Sensors |
| Origin | - |
| Model Number | FSR402 |
| Sensor Type | Resistive Thin-Film |
| Active Area Diameter | 18.29 mm |
| Force Range | 0.1 N to 100 N |
| Operating Voltage | 3.3V - 5V DC |
| Interface | Analog Output |
| Thickness | < 0.5 mm |
| Response Time | < 10 ms |
| Connector Type | 0.1 inch Pitch Header |
| Application | Robotics, Touch Pads, Musical Instruments |
6 reviews
A
Anonymous
Mar 14, 2026
Rating: 5/5
Exactly what I expected
The FSR402 Resistive Thin-Film Pressure Sensor Force-Sensing Resistor Thin-Film RFP602 Weighing Sensor Module arrived in good condition and matches the listing details.
A
Anonymous
Mar 11, 2026
Rating: 4/5
Works as described
No major issues. The finish and fit are both acceptable for this range.
A
Anonymous
Mar 11, 2026
Rating: 5/5
Solid everyday option
Simple, reliable, and easy to integrate with my existing setup.
A
Anonymous
Mar 05, 2026
Rating: 4/5
Reliable and practical
After a few days of use, it feels dependable and consistent for routine tasks.
A
Anonymous
Mar 03, 2026
Rating: 5/5
Will buy again
Helpful product page and smooth experience overall.
5 FAQ
Q: What is the maximum load before the sensor breaks?
A: While the recommended range is up to 100N, applying excessive point loads over 200N may damage the thin-film element permanently. We recommend distributing the force evenly.
Q: Does this come with a breakout board?
A: This listing is for the raw FSR402 sensor element with a connector tail. A separate breakout board is available in our store if you need easier integration.
Q: Is this compatible with Raspberry Pi?
A: Yes, but since the Raspberry Pi GPIO pins do not have built-in ADCs, you will need an external Analog-to-Digital Converter (like the MCP3008) to read the sensor's output.
Q: How long is the cable tail?
A: The flexible printed circuit tail extending from the active area is approximately 76mm (3 inches) long, which is sufficient for most breadboard connections.
Q: Can this sensor measure weight in grams directly?
A: The sensor outputs an analog voltage based on resistance change due to force. You will need to calibrate it with known weights in your microcontroller code to convert the reading to grams.
![[Youxin Electronics] GP2Y0E03 Infrared Distance Sensor Module 4-50cm Range](https://www.gosteppe.com/cache/medium/product/74667/legacy-main-4da8cadc5fc82afe91b124e3.webp)
![[Trial Pack] Xianlang Complete Cat Treat Sticks Meal Packs Main Course Cans Freeze-Dried Cat Food Sample Snacks Gift Set](https://www.gosteppe.com/cache/medium/product/208273/legacy-main-9ec245ebf781f65a434ba854.webp)
![[Damai Holds Micro-Needle Hair Transplant Patent] O-Type Hair Loss | 2500 Grafts Crown Planting by Professional Hair Transplant Clinic](https://www.gosteppe.com/cache/small/product/269464/legacy-main-204729c71a0ebedeeed4d309.webp)
![[Damai Holds Micro-Needle Hair Transplant Patent] AI Robot Precision Hair Transplant | 1000 Units Hairline Planting](https://www.gosteppe.com/cache/small/product/269438/legacy-main-d695e1be3b1b8212f24ac863.webp)
