Anonymous
Mar 31, 2026
Rating: 5/5
Consistent extrusion
Very consistent extrusion even at higher speeds. The threading is clean and it seals tightly against the heat break.
Description
Reviews
| Brand | - |
| Category | Root / Office Equipment, Supplies & Services |
| Origin | - |
| Brand | Mellow |
| Material | Hardened Steel |
| Compatible Hotend | E3D V6 Style |
| Filament Diameter | 1.75mm / 3.0mm |
| Nozzle Type | High Flow Clone CHT |
| Thread Size | M6 |
| Orifice Diameter | 0.4mm (Standard) |
| Max Temperature | 300°C |
| Package Contents | 1x Nozzle, 1x Wrench |
| Country of Origin | China |
Anonymous
Mar 31, 2026
Rating: 5/5
Consistent extrusion
Very consistent extrusion even at higher speeds. The threading is clean and it seals tightly against the heat break.
Anonymous
Mar 24, 2026
Rating: 4/5
Good value alternative
Works just as well as the original E3D nozzles I've used before, but at a fraction of the cost. Fits my V6 hotend perfectly.
Anonymous
Mar 22, 2026
Rating: 3/5
Requires precise tuning
The high flow is great, but it took me a while to dial in the temperature and retraction settings. Not ideal for beginners who want plug-and-play.
Anonymous
Mar 19, 2026
Rating: 5/5
Excellent flow rate for bulk printing
This nozzle significantly improved my print speeds without sacrificing quality. The CHT design really helps with melting efficiency on PLA and PETG.
Anonymous
Mar 11, 2026
Rating: 4/5
Solid upgrade
Noticed less clogging compared to my old brass nozzle. Would recommend keeping a spare since they are affordable.
Anonymous
Mar 07, 2026
Rating: 5/5
Perfect for abrasive filaments
I bought this specifically for printing with carbon fiber filled PLA. The hardened steel holds up well and hasn't shown any wear after 500 grams.
Q: Is this nozzle compatible with the standard E3D V6 hotend?
A: Yes, this is designed as a universal clone specifically for E3D V6 style hotends with M6 threads.
Q: What is the maximum safe operating temperature?
A: The hardened steel construction allows for safe operation up to 300°C, making it suitable for most engineering filaments.
Q: Can I use this with 3.0mm filament?
A: Yes, the product supports both 1.75mm and 3.0mm filament diameters, though you may need to adjust your slicer settings accordingly.
Q: How does the CHT technology benefit printing?
A: CHT (Capillary High Flow) technology splits the filament into three channels inside the nozzle, increasing the surface area for faster and more efficient melting.
Q: Does it come with a wrench for installation?
A: Yes, the package includes a small nozzle wrench to help you install or remove the nozzle safely.