Anonymous
Mar 27, 2026
Rating: 5/5
Easy to print for beginners
As someone new to 3D printing, this filament was very forgiving. It printed well right out of the box with standard PLA settings on my Ender 3.
Description
Reviews
| Brand | - |
| Category | Root / Office Equipment, Supplies & Services |
| Origin | - |
| Material Type | PLA (Polylactic Acid) |
| Filament Diameter | 1.75mm |
| Net Weight | 1 kg (2.2 lbs) |
| Finish | Matte |
| Printing Temperature | 190°C - 220°C |
| Bed Temperature | 50°C - 60°C |
| Printer Compatibility | Creality, Bambu Lab, Prusa, and most FDM printers |
| Tolerance Accuracy | ±0.02 mm |
| Spool Dimensions | 200mm outer diameter, 55mm inner hole |
| Recommended Print Speed | Up to 300 mm/s for high-speed models |
Anonymous
Mar 27, 2026
Rating: 5/5
Easy to print for beginners
As someone new to 3D printing, this filament was very forgiving. It printed well right out of the box with standard PLA settings on my Ender 3.
Anonymous
Mar 24, 2026
Rating: 5/5
No bad smell, safe for home use
We use this in our home office and there is virtually no odor during printing. The kids love the smooth, non-glossy feel of the finished toys.
Anonymous
Mar 22, 2026
Rating: 5/5
Consistent quality batch after batch
I have ordered five spools of different colors. Every single one has had consistent diameter and flow rate. Highly recommended for professional prototypes.
Anonymous
Mar 20, 2026
Rating: 4/5
Great finish, slight warping on large prints
The matte texture hides layer lines beautifully. I did experience minor warping on a very large vase print, but adding a brim solved it immediately. Overall excellent value.
Anonymous
Mar 09, 2026
Rating: 5/5
Perfect for high-speed printing
I used this matte PLA on my Bambu Lab X1C and the results are stunning. The layers adhere perfectly even at 250mm/s. No clogging issues whatsoever.
Anonymous
Mar 01, 2026
Rating: 4/5
Good strength, nice matte look
The mechanical properties are solid for PLA. The matte finish gives parts a premium look without needing post-processing. Deducted one star only because the spool packaging was slightly damaged on arrival, though the filament was fine.
Q: Can I print support structures with this same filament?
A: Absolutely. Since this is standard PLA, you can use it for both models and support structures. Just adjust your support interface settings in your slicer for easier removal.
Q: Does this come in a vacuum-sealed bag with desiccant?
A: Yes, every spool is individually vacuum-sealed with a reusable desiccant packet to ensure freshness during storage and shipping.
Q: What is the shelf life of this filament?
A: When stored in a cool, dry place within its sealed packaging, the filament has a shelf life of up to 2 years without degradation in print quality.
Q: Is this filament compatible with the Bambu Lab P1P?
A: Yes, this Lanbo Matte PLA is fully compatible with all Bambu Lab printers, including the P1P, X1C, and A1 series.
Q: What is the recommended drying time if the filament absorbs moisture?
A: If the filament has absorbed moisture, we recommend drying it at 45°C for 4-6 hours in a filament dryer before use.