Attributes

Brand	-
Category	Root / Office Equipment, Supplies & Services
Origin	-
Material	Hardened Steel
Nozzle Type	CHT Clone (Three-Hole)
Compatibility	E3D V6 Hotend
Thread Size	M6
Orifice Diameter	0.4mm (Standard)
Max Temperature	Up to 300°C
Flow Rate	High-Flow Design
Wear Resistance	Suitable for Abrasive Filaments
Package Contents	1x Nozzle, 1x Thermal Paste Sample
Country of Origin	China

6 reviews

Anonymous

Mar 31, 2026

Rating: 3/5

Decent but requires tuning

The nozzle itself is solid hardware, but I had to recalibrate my extruder steps and temperature settings to get optimal results. Once tuned, it works well, but don't expect it to be a direct drop-in replacement without some tweaking.

Anonymous

Mar 22, 2026

Rating: 5/5

Survived abrasive materials

I run a lot of wood-fill and glow-in-the-dark filaments which are notorious for eating brass nozzles. This hardened steel version has lasted three times longer than my previous brass ones. Very satisfied with the durability.

Anonymous

Mar 13, 2026

Rating: 4/5

Good value clone

Works just as well as the original E3D nozzles I've used in the past but at a fraction of the cost. Installation was straightforward on my V6 hotend. Only giving 4 stars because the threading felt slightly tighter than expected, but it seated fine once tightened.

Anonymous

Mar 12, 2026

Rating: 5/5

Excellent high-flow performance

The CHT clone design allows me to push filament much faster without under-extrusion issues. I'm currently running PETG at higher speeds and the print quality remains sharp. Highly recommended for anyone looking to upgrade their throughput.

Anonymous

Mar 03, 2026

Rating: 5/5

Great for carbon fiber prints

I switched to this hardened steel nozzle specifically for printing with carbon fiber filled PLA. It has held up perfectly after several spools without any signs of wear or widening of the orifice. The three-hole design really does seem to improve flow consistency.

Anonymous

Mar 01, 2026

Rating: 4/5

Solid upgrade for beginners

As someone new to 3D printing, I wasn't sure if I needed a hardened nozzle, but after clogging two brass ones, I decided to try this. It's been reliable and easy to clean. The instructions could be clearer, but overall a good purchase.

5 FAQ

Q: What is the actual hole size? Is it exactly 0.4mm?

A: The nominal size is 0.4mm. However, due to manufacturing tolerances inherent in hardened steel machining, there may be a slight variance of +/- 0.02mm. This does not typically affect print quality.

Q: Is this nozzle compatible with the E3D V6 Lite?

A: Yes, this nozzle features standard M6 threading and is fully compatible with both the standard E3D V6 and the V6 Lite hotends.

Q: How does the three-hole design improve printing?

A: The CHT (Capillary High-Temperature) style three-hole design splits the filament into three streams before merging them again. This increases the surface area contact with the hot zone, allowing for faster melting and higher flow rates without increasing temperature significantly.

Q: Does this come with a gasket or seal?

A: This package includes the nozzle and a small sample of thermal paste. It does not include a silicone sock or a separate gasket, as the metal-to-metal contact in the V6 heat block usually provides the seal. We recommend reusing your existing heat break seal or applying high-temperature tape if needed.

Q: Can I use this with PLA only, or do I need it for other materials?

A: While you can use it with PLA, hardened steel nozzles are primarily designed for abrasive filaments like carbon fiber, wood-fill, or metal-fill. For standard PLA, a brass nozzle is usually sufficient unless you require the high-flow benefits of the CHT design.

Explore your interests

Xiaomi Official Flagship, Compatible with T200/T200C, Mijia Sonic Electric Toothbrush Heads, 3-Pack

$39.00

3D Printer DIY Accessories 6*20 Single-End Electric Heating Tube 50W High-Power High-Temperature Heating Rod Single-End 24V

$30.00

Leji 3D Printer Bambu Lab High-Conductivity GD900 Thermal Grease for Hotend, Throat Tube, and Heatsink

$7.60

HP Type-C Dual Interface USB Flash Drive - Phone Backup Tool for Computers, Large Capacity for iPhone 15/16/17

$79.90

VORON 0.1/2.4 Print Head Replacement Dragon Nozzle E3D V6 Hot End Upgrade DIY

$52.91

FANMU MP3 Player for Students - Dedicated English Listening Device for High Schoolers, Bluetooth MP4 Music Player

$179.00

Fanmu MP4 with WiFi Internet Access, MP5 for High School Students, Dedicated MP3 Portable Music Player, Magical Device for Listening to Songs, MP9

$199.00

ND Ceramic Heating Block Brass Hardened Steel Nozzle High-Speed Printing Hotend

$90.54

3D Printer Accessories Hotend Ring Heating Ceramic Heater Aluminum Block V6/Volcano Quick-Heat Sheet Kit

$96.00

Nozzle Cleaning Brush for 3D Printer Aluminum Block Rust Removal

$1.80

3D Printer Hotend Heating Assembly for H2D

$169.00

League of Legends LOL PC Game Points Recharge 10000 LOL Points Top-Up Fast Delivery

$91.00

Lineage Classic Server Top-Up: HK/Macau/TW/Global, Monthly/Quarterly Cards, Gift Packs, Stored Value & Microtransactions

$13.85

3D Printer Accessories Upgrade Flashforge AD5M Ceramic Hotend Kit Quick-Disconnect Detachable Hardened Steel Nozzle Extruder Print Head

$54.60

Huasu 3D Upgraded V6 Hotend Universal Bambu Nozzle Extruder Accessory, High-Temp High-Speed Print Head

$195.40

Compatible with Bambu Lab A1/A1 mini Hotend Kit Upgrade Brass Heat Dissipation Detachable Hardened Steel Nozzle Accessories

$6.21

Zhen Brand 125/183 Black PVC Electrical Tape, Electrical Insulation Tape, Flame-Retardant, Lead-Free, Waterproof Sealing Identification, Widened Electrical Cloth, High Adhesion, High Voltage Automotive Wire Harness Cables Black Tape

$10.00

Gray Series Hard Cardstock A4/8k for Handmade Paper-Cutting, 4K Colored Pencil Drawing, Full Sheet Thickened A3 Light Gray, Advanced Gray, Smoke Silver, Gentleman Dark Gray for Mounting and Background Design

$8.87

Recommended by Papi Jiang | Anker AI Recording Bean Feishu Smart Voice Recorder Meeting Record Artifact Portable Translation Card

$899.00

Queen Card 50 Yuan Automatic Delivery Official Card Key, No Fake Orders in This Store, Beware of Gambling Scams

$50.00

3D Printer Accessories Hotend Ring Heating Ceramic Heater Aluminum Block V6/Volcano Quick Heating Plate Kit

$96.00

Type-C Mobile USB Flash Drive 512GB Dual Interface 256GB Ultra-High Capacity 1TB for Phone and PC 128GB High-Speed 64GB

$23.70

Hot Sale E3D V6 Titanium Alloy Red Copper Heat Break: Wear-Resistant High-Temp 3D Printer Component for Voron DIY

$21.00

Multi-Function Direct Extruder Kit 10-in-1 for 3D Printers

$97.80

Spring Sowing Various Vegetable Seedlings Complete Collection Four Seasons Tomato Pepper Cucumber Southern Seeds

$42.50

[Lawyer's AI New Partner] DingTalk A1 Legal Edition AI Smart Voice Recorder Analysis Translation Card

$1,099.00

Phaetus Co-Branded with Creality Silicon Carbide K2 Plus/K2 Pro/Hi Integrated All-Metal Silicon Carbide Nozzle

$153.00

Custom Payment QR Code Signs - WeChat Collection Code Stickers, Alipay Friend Ordering Codes, Printed with Adhesive Backing

$3.49

3D Printer Hotend Kit Ceramic Nozzle for Creality Ender 3 V3/V3 Plus

$11.85

Electrician Tape Black Insulating Tape Flame-retardant Cloth Colored High Temperature Resistant High Adhesion PVC Waterproof Cloth Electrical Insulating Cloth

$10.10