Anonymous
Mar 20, 2026
Rating: 4/5
Does the job
Effective at removing carbon buildup. I wish the case was a bit more robust, but the tools themselves are excellent quality.
Description
Reviews
| Brand | - |
| Category | Root / Office Equipment, Supplies & Services |
| Origin | - |
| Material | High-Carbon Steel with Flexible Shaft |
| Compatible Sizes | 0.2mm, 0.3mm, 0.4mm |
| Shaft Length | 100mm |
| Compatibility | Most FDM 3D Printer Hotends |
| Package Contents | 3 Cleaning Bits, 1 Storage Case |
| Weight | 15 grams |
| Color | Silver and Black |
| Usage Temperature | Safe up to 300°C (when cooled) |
| Brand | PrintClean Pro |
| Shipping Method | Free Standard Shipping |
Anonymous
Mar 20, 2026
Rating: 4/5
Does the job
Effective at removing carbon buildup. I wish the case was a bit more robust, but the tools themselves are excellent quality.
Anonymous
Mar 18, 2026
Rating: 5/5
No more cold pulls needed
This is much faster than doing cold pulls. It cleaned out my E3D V6 hotend in seconds. Will definitely buy again when these wear out.
Anonymous
Mar 13, 2026
Rating: 4/5
Good value for the price
Works well for routine maintenance. The 0.2mm bit is a bit fragile if you force it, so be gentle. Overall, a great addition to my toolkit.
Anonymous
Mar 10, 2026
Rating: 5/5
Saved my print head!
My 0.4mm nozzle was completely clogged after a bad filament run. This flexible bit went right in and cleared the blockage without damaging the threads. Highly recommended for any 3D printer owner.
Anonymous
Mar 07, 2026
Rating: 5/5
Essential tool
I use these weekly on my farm of printers. They are durable and the flexible shaft makes it easy to navigate the heat break. Free shipping was a nice bonus too.
Anonymous
Mar 02, 2026
Rating: 5/5
Easy to use for beginners
I was scared to clean my nozzle manually, but this tool made it simple. The instructions were clear, and it fixed my under-extrusion issue immediately.
Q: What is the return policy if the wrong size is shipped?
A: We offer a full refund or replacement if an incorrect item is received. Please contact our support team within 30 days of delivery.
Q: Is this compatible with a Creality Ender 3?
A: Yes, these tools are designed to fit standard 0.2mm, 0.3mm, and 0.4mm nozzles found on the Ender 3 and most other FDM printers.
Q: Does the package include a 0.5mm bit?
A: No, this specific kit only includes 0.2mm, 0.3mm, and 0.4mm sizes. Please check our store for separate 0.5mm options if needed.
Q: Can these bits be used while the nozzle is hot?
A: No, please allow the hotend to cool down to room temperature before inserting the cleaning tool to avoid injury or damage to the bit.
Q: How many times can I reuse each bit?
A: With proper care and gentle usage, each bit can be reused dozens of times. Replace them if you notice bending or reduced cleaning efficiency.