Anonymous
Mar 31, 2026
Rating: 5/5
Silent operation
No hum or buzz whatsoever. The grounding is done correctly from the factory. The 5-way switch clicks firmly into place. Very satisfied with this purchase.
Description
Reviews
| Brand | - |
| Category | Root / Musical Instruments/Guitars/Pianos/Accessories |
| Origin | - |
| Compatibility | Stratocaster-style electric guitars (SSS configuration) |
| Potentiometer Value | 250k Ohm Audio Taper |
| Capacitor Type | 0.047µF Film Capacitor |
| Output Jack | Standard 1/4 inch Mono Jack included |
| Wire Gauge | 22 AWG High-quality insulated copper wire |
| Knob Fitment | Fits standard split-shaft potentiometers |
| Pickup Selector | 5-Way Blade Switch pre-wired |
| Grounding | Common ground bus bar integrated |
| Installation Difficulty | Intermediate (Soldering skills required) |
| Package Contents | Pre-wired harness, output jack, mounting screws, and diagram |
Anonymous
Mar 31, 2026
Rating: 5/5
Silent operation
No hum or buzz whatsoever. The grounding is done correctly from the factory. The 5-way switch clicks firmly into place. Very satisfied with this purchase.
Anonymous
Mar 16, 2026
Rating: 5/5
Perfect upgrade for budget guitars
I bought this to replace the cheap electronics in an entry-level guitar. The difference in tone clarity and volume control is night and day. Highly recommended for DIY upgrades.
Anonymous
Mar 14, 2026
Rating: 5/5
Pro sound on a budget
As a gigging musician, I need reliable gear. This harness has held up through several gigs and rehearsals without any crackling or failure. The taper on the volume pot is very musical.
Anonymous
Mar 14, 2026
Rating: 3/5
Good but instructions could be better
The harness itself is excellent quality, but the included diagram was a bit vague regarding the ground connection to the bridge. I had to look up a video to confirm the setup.
Anonymous
Mar 12, 2026
Rating: 5/5
Saved me hours of soldering
This harness is a lifesaver. The solder joints are clean, and the pots feel smooth. Installed it in my project Strat in under an hour, and it sounds fantastic with no noise issues.
Anonymous
Mar 07, 2026
Rating: 4/5
Great quality, tight fit
The components feel premium, especially the capacitors. Only giving 4 stars because the wiring was slightly too long for my specific cavity, requiring some careful bundling, but it works perfectly now.
Q: Does this come with a warranty?
A: Yes, this product includes a 1-year manufacturer's warranty covering defects in materials and workmanship. Please contact our support team with your order number for claims.
Q: What is the tolerance on the potentiometers?
A: The potentiometers have a standard industry tolerance of +/- 20%, which is typical for audio applications and ensures consistent performance across the set.
Q: Will this fit a guitar with humbuckers?
A: No, this harness is specifically designed for SSS (Single-Single-Single) pickup configurations typically found in Stratocaster-style guitars. It is not compatible with humbucker setups without significant modification.
Q: Do I need to buy separate solder?
A: While the harness comes pre-soldered, you will need your own solder and soldering iron to connect the harness to your pickups and the output jack during installation.
Q: Is the 5-way switch replaceable if it breaks later?
A: Yes, the switch is soldered onto the harness but can be desoldered and replaced with a standard 5-way blade switch if it ever fails due to wear and tear.