Anonymous
Apr 17, 2026
Rating: 3/5
Pressure limits
Failed slightly when we pushed it to the max pressure limit. Works fine at 5 bar but be careful going higher.
Description
Reviews
| Brand | - |
| Category | 3D Printing Accessories / Hot End and Nozzle |
| Origin | - |
| Material | High-Grade Engineering Plastic |
| Spray Pattern | Flat Fan |
| Mixing Type | Two-Fluid External Mix |
| Air Connection | 1/4 inch NPT |
| Liquid Connection | 1/4 inch NPT |
| Max Pressure | 7 Bar (100 PSI) |
| Spray Angle | 60 Degrees |
| Temp Resistance | 0°C to 60°C |
| Weight | 45 Grams |
| Package Includes | 1 Nozzle Unit |
Anonymous
Apr 17, 2026
Rating: 3/5
Pressure limits
Failed slightly when we pushed it to the max pressure limit. Works fine at 5 bar but be careful going higher.
Anonymous
Mar 25, 2026
Rating: 5/5
Perfect mist
Humidification is even and consistent. We use it in a greenhouse setup and plants are responding well to the increased moisture.
Anonymous
Mar 05, 2026
Rating: 5/5
Excellent for dust control
Works great in our warehouse. The mist is fine and covers a wide area without dripping. Installation was straightforward.
Anonymous
Feb 08, 2026
Rating: 4/5
Good value
Plastic is light but works well for low pressure applications. Would prefer metal for harsher environments but this fits our budget.
Anonymous
Jan 31, 2026
Rating: 5/5
Easy install
Threaded nicely onto our existing pipes. No leaks detected after a week of continuous operation. Very satisfied.
Q: Can I adjust the flow rate?
A: The flow rate is adjusted via your external air and liquid regulators, not directly on the nozzle itself.
Q: Is there a metal version available?
A: Yes, please check our Stainless Steel Air Atomizing Nozzle series for higher temperature and pressure applications.
Q: What is the minimum pressure required?
A: We recommend a minimum operating pressure of 2 Bar for effective atomization. Lower pressure may result in dripping.
Q: Is this compatible with acidic solutions?
A: This plastic nozzle is designed for water-based solutions. For strong acids, we recommend checking our chemical resistance chart or using a stainless steel model.
Q: How do I clean clogs?
A: Use a soft brush and water to clean the nozzle face. Avoid using metal pins that could damage the internal geometry.