A
Anonymous
Apr 20, 2026
Rating: 4/5
Good Value
Works well but requires clean water to avoid clogging. Make sure to install a filter.
Description
LNN Low-Pressure Micro-Mist Nozzle in 304 Stainless Steel and Brass for Dust Suppression, Humidification, and Cooling
Reviews
Attributes
| Brand | - |
| Category | 3D Printing Accessories / Hot End and Nozzle |
| Origin | - |
| Material Composition | 304 Stainless Steel / Brass |
| Operating Pressure Range | 0.5 - 3.0 Bar |
| Flow Rate Capacity | 0.15 - 0.45 L/min |
| Spray Pattern Angle | 75 Degrees |
| Thread Specification | 1/4 inch NPT |
| Orifice Diameter | 0.2 mm |
| Operating Temperature | -10°C to 80°C |
| Unit Weight | 18 grams |
| Surface Finish | Polished |
| Package Quantity | 10 Nozzles per Pack |
5 reviews
A
Anonymous
Apr 07, 2026
Rating: 5/5
Easy Install
Threaded perfectly into our existing piping. No leaks detected after a week of operation.
A
Anonymous
Feb 24, 2026
Rating: 5/5
Excellent Mist Quality
Works great for our warehouse cooling system. Fine mist produced consistently without dripping.
A
Anonymous
Feb 21, 2026
Rating: 5/5
Durable Build
Stainless steel holds up well against corrosion in our humidification setup. Very satisfied.
A
Anonymous
Feb 14, 2026
Rating: 5/5
Effective Cooling
Noticed temperature drop immediately in our greenhouse. Perfect for plant humidity control.
5 FAQ
Q: What is the expected lifespan of the nozzle under continuous use?
A: With proper filtration and maintenance, the nozzle can last over 5 years of continuous operation.
Q: What is the main difference between the brass and stainless steel versions?
A: Stainless steel offers superior corrosion resistance, while brass is cost-effective for dry environments.
Q: Can this nozzle handle high pressure systems above 5 Bar?
A: No, this model is designed specifically for low pressure systems between 0.5 and 3.0 Bar.
Q: Do I need to install a water filter with these nozzles?
A: Yes, an inline filter is highly recommended to prevent mineral buildup and clogging.
Q: Are adapters available for different thread sizes?
A: Yes, we offer 1/8 inch and 3/8 inch NPT adapters separately in our accessories section.
![Bambu Lab Right Hotend Heating Assembly 3D Printer Accessory [Compatible with H2D]](https://www.gosteppe.com/cache/medium/product/2203/legacy-main-d56482b3801c18329d097eb5.png)
![[Upgraded] TZ A1/A1 mini Brass Heatsink Detachable Hardened Steel Nozzle Hotend Print Head Ceramic Heating 70W + Temperature Sensor Component Silicone Sleeve Black](https://www.gosteppe.com/cache/medium/product/7690/legacy-main-1086528884a8845363ef5d28.webp)
![[Deposit] Xingweimian Lolita 2025 Spring/Summer Rain Falling on Celadon Fishbone Elegant CL Original Formal Dress](https://www.gosteppe.com/cache/small/product/269584/legacy-main-b7d69fcd01bf0df79a1c8eb8.webp)
![[Buy 2 Get 10% Off] Lanzhai Purple Iris Painted Felt Mat – Thickened, Moisture-Resistant, Non-Pilling for Calligraphy & Painting](https://www.gosteppe.com/cache/small/product/269581/legacy-main-603d11ff0e43b7741fb1dc38.webp)
