Anonymous
Mar 31, 2026
Rating: 4/5
Solid for industrial prototyping
We used several of these for initial testing of a new control unit. They are reliable and stable. Would prefer if it included an onboard debugger, but external ST-Link works fine.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Development, Learning, Evaluation & Industrial Control Boards |
| Origin | - |
| Microcontroller Model | STM32H750VBT6 / STM32H743VIT6 |
| Core Architecture | ARM Cortex-M7 |
| Maximum Frequency | 480 MHz |
| Flash Memory | 128 KB (H750) / 2 MB (H743) |
| SRAM Capacity | Up to 1 MB |
| Operating Voltage | 3.3V |
| Debug Interface | SWD / JTAG |
| Connector Type | Standard 2.54mm Pin Header |
| Board Dimensions | 60mm x 40mm |
| Supported IDEs | Keil MDK, IAR EWARM, STM32CubeIDE |
Anonymous
Mar 31, 2026
Rating: 4/5
Solid for industrial prototyping
We used several of these for initial testing of a new control unit. They are reliable and stable. Would prefer if it included an onboard debugger, but external ST-Link works fine.
Anonymous
Mar 22, 2026
Rating: 5/5
Excellent performance for high-speed projects
This board is fantastic for prototyping high-performance embedded systems. The 480MHz clock speed handles complex DSP tasks effortlessly. Pinout is standard and easy to integrate with breakout boards.
Anonymous
Mar 16, 2026
Rating: 5/5
Best learning board for advanced ARM
As a student moving from Arduino to professional MCUs, this board was the perfect step up. Plenty of resources online and the community support for H7 series is growing fast.
Anonymous
Mar 12, 2026
Rating: 4/5
Great value, minor documentation gaps
Hardware quality is top-notch and the chip runs cool even under load. Only giving 4 stars because the schematic provided could be more detailed for custom peripheral expansion.
Anonymous
Mar 08, 2026
Rating: 5/5
Perfect for motor control applications
Used this for a quadruped robot project. The timer resolution and ADC speed are incredible. STM32CubeMX configuration worked flawlessly right out of the box.
Anonymous
Mar 03, 2026
Rating: 5/5
Fast shipping and genuine chips
Arrived quickly and well-packaged. Verified the chip ID via software and it is genuine STMicroelectronics. Bootloader works perfectly for DFU updates.
Q: Can I power this board via USB-C?
A: This specific core board model does not have a USB-C power input. It is designed to be powered via the 5V and GND header pins from an external supply or carrier board.
Q: What is the difference between the H750 and H743 versions?
A: The main difference is memory. The H743 has 2MB of Flash and full feature set, while the H750 is a value line with 128KB of Flash. Both share the same 480MHz Cortex-M7 core.
Q: Is there a MicroSD card slot on this board?
A: No, this is a minimal core board and does not include a MicroSD slot. However, the SDIO interface pins are broken out on the header so you can connect an external module.
Q: Does this board come with an onboard programmer/debugger?
A: No, this core board does not include an onboard debugger. You will need an external ST-Link V2 or V3 programmer to flash code and debug.
Q: Is the 5V pin tolerant on the GPIO headers?
A: Most GPIO pins are 3.3V only and are not 5V tolerant. Please use level shifters if interfacing with 5V logic devices to avoid damaging the board.