Anonymous
Mar 28, 2026
Rating: 5/5
Reliable for industrial prototypes
I used this for a motor control prototype. The PWM outputs are clean, and the ADC resolution is excellent. It handled continuous operation for weeks without overheating.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Development, Learning, Evaluation & Industrial Control Boards |
| Origin | - |
| Microcontroller | STM32F407VET6/VGT6 Cortex-M4 |
| Core Architecture | 32-bit ARM RISC |
| Max Frequency | 168 MHz |
| Flash Memory | 512 KB |
| SRAM | 192 KB |
| I/O Ports | Up to 114 fast I/Os |
| Communication Interfaces | USB OTG, Ethernet, CAN, SPI, I2C, USART |
| Debug Interface | JTAG/SWD |
| Operating Voltage | 3.3V |
| Board Dimensions | 55mm x 80mm |
Anonymous
Mar 28, 2026
Rating: 5/5
Reliable for industrial prototypes
I used this for a motor control prototype. The PWM outputs are clean, and the ADC resolution is excellent. It handled continuous operation for weeks without overheating.
Anonymous
Mar 18, 2026
Rating: 4/5
Great value, minor documentation gaps
Hardware quality is solid and the chip runs at full speed without issues. The only downside is that the schematic could be more detailed for advanced peripheral usage. Still a great buy.
Anonymous
Mar 14, 2026
Rating: 5/5
Easy to set up
As a beginner, I was worried about configuration, but the community support for this specific board model is huge. Got my first LED blinking in under an hour.
Anonymous
Mar 12, 2026
Rating: 4/5
Solid minimal system board
Good build quality for the price point. The crystal oscillator is stable. I wish it had an onboard debugger, but using an external ST-Link is standard practice anyway.
Anonymous
Mar 12, 2026
Rating: 5/5
Perfect for learning ARM architecture
This board is exactly what I needed to get started with STM32 development. The pinout is clearly labeled, and it works flawlessly with STM32CubeIDE. Highly recommended for students.
Anonymous
Mar 09, 2026
Rating: 5/5
Excellent connectivity options
The Ethernet and USB OTG features work perfectly out of the box. I successfully ported a lightweight TCP/IP stack to it. Great board for IoT projects.
Q: Is an invoice provided for this purchase?
A: Yes, as mentioned in the product description, a valid tax invoice is available for all orders. Please ensure your billing details are correct at checkout.
Q: Can I use this with Arduino IDE?
A: Yes, you can use this board with the Arduino IDE by installing the appropriate STM32 core package (e.g., from STMicroelectronics or Maple).
Q: Is the 5V pin an input or output?
A: The 5V pin can function as both. You can power the board via USB or the 5V pin (input), or if powered via USB, you can use the pin to supply 5V to external modules (output).
Q: What debugger do you recommend for this board?
A: We recommend the ST-Link V2 or V3 debugger/programmer, which connects easily via the SWD header pins located on the edge of the board.
Q: Does this board come with a pre-installed bootloader?
A: Yes, the board comes with the standard STM32 system memory bootloader which allows programming via UART, as well as support for DFU mode over USB.