Anonymous
Mar 28, 2026
Rating: 5/5
Robust connectivity options
I needed Ethernet and CAN FD for an industrial prototype, and this board delivered immediately. The onboard ST-Link works perfectly with STM32CubeIDE. Highly recommended.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Development, Learning, Evaluation & Industrial Control Boards |
| Origin | - |
| Microcontroller Model | STM32H743VGT6 / H7B0VBT6 |
| Core Architecture | ARM Cortex-M7 |
| Maximum Frequency | 480 MHz |
| Flash Memory | 1 MB |
| SRAM Capacity | 512 KB + 4 MB QSPI |
| Operating Voltage | 3.3V (USB Powered) |
| Debug Interface | SWD / JTAG via onboard ST-Link V3 |
| Connectivity | USB Type-C, Ethernet PHY, CAN FD |
| Expansion Headers | Arduino Uno R3 Compatible, PMOD |
| Board Dimensions | 75mm x 55mm |
Anonymous
Mar 28, 2026
Rating: 5/5
Robust connectivity options
I needed Ethernet and CAN FD for an industrial prototype, and this board delivered immediately. The onboard ST-Link works perfectly with STM32CubeIDE. Highly recommended.
Anonymous
Mar 21, 2026
Rating: 4/5
Solid board, minor documentation gaps
The hardware itself is top-notch. I deducted one star because the specific pin mapping for the QSPI flash wasn't immediately obvious in the included quick start guide.
Anonymous
Mar 21, 2026
Rating: 5/5
Replaced my old F4 boards
The jump from F4 to H7 is massive. Graphics rendering on an attached LCD is smooth. The memory layout is complex but well documented in the reference manual.
Anonymous
Mar 13, 2026
Rating: 4/5
Great value but steep learning curve
Excellent hardware for the price. However, if you are new to the H7 series, be prepared to spend time configuring the clock tree in CubeMX. Once set up, it runs flawlessly.
Anonymous
Mar 12, 2026
Rating: 5/5
Perfect for high-performance embedded projects
This board is incredibly fast. The 480MHz clock speed handles my DSP algorithms without breaking a sweat. The pinout is clearly labeled, and the build quality feels premium.
Anonymous
Mar 03, 2026
Rating: 5/5
Industry standard performance
Using this for evaluating real-time control loops. The deterministic performance of the Cortex-M7 at this frequency is exactly what I needed. No stability issues after weeks of testing.
Q: Can I use Arduino IDE with this specific H7 board?
A: Yes, you can use the Arduino IDE by installing the STM32duino core. You will need to select the appropriate generic H7 variant or add a custom board definition file.
Q: Does this board come with a pre-installed bootloader?
A: Yes, the board comes with the standard STM32 system memory bootloader, allowing you to program via UART or USB DFU mode out of the box.
Q: What is the maximum resolution supported for ADC?
A: The STM32H743 features up to three 16-bit ADCs. Please refer to the specific datasheet for sampling rates and channel availability on GPIO pins.
Q: Is there a schematic available for download?
A: Yes, a full PDF schematic and KiCad project files are available in the 'Documents' section of the product page under the Resources tab.
Q: Is the 5V pin capable of supplying power to external sensors?
A: The 5V pin is primarily an input from the USB connection. While it can source some current for low-power sensors, we recommend using an external supply for high-current peripherals to ensure stability.