Anonymous
Mar 28, 2026
Rating: 5/5
Best mini ESP32 I've used
The form factor is unbeatable. I fit three of these into a small wearable device. Power consumption is also quite low in deep sleep mode. Will buy more.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Development, Learning, Evaluation & Industrial Control Boards |
| Origin | - |
| Microcontroller | ESP32-C3FH4 |
| CPU Core | 32-bit RISC-V single-core processor |
| Clock Speed | Up to 160 MHz |
| Flash Memory | 4 MB |
| SRAM | 400 KB |
| Wireless Connectivity | Wi-Fi 802.11 b/g/n and Bluetooth 5 (LE) |
| GPIO Pins | 22 programmable GPIOs |
| Interface | USB Type-C for power and programming |
| Operating Voltage | 3.3V |
| Dimensions | SuperMini form factor (approx. 20mm x 17mm) |
Anonymous
Mar 28, 2026
Rating: 5/5
Best mini ESP32 I've used
The form factor is unbeatable. I fit three of these into a small wearable device. Power consumption is also quite low in deep sleep mode. Will buy more.
Anonymous
Mar 22, 2026
Rating: 5/5
Ideal for learning embedded systems
Bought this for my university project. It works seamlessly with Arduino IDE and ESP-IDF. The Bluetooth Low Energy feature worked perfectly for my mobile app integration.
Anonymous
Mar 22, 2026
Rating: 5/5
Reliable and fast
Using it to control smart lights in my home. The boot time is fast, and it reconnects to Wi-Fi instantly after power cycles. Very satisfied with the build quality.
Anonymous
Mar 19, 2026
Rating: 4/5
Good board, needs external antenna for long range
For general indoor use, the onboard antenna is fine. However, if you need long-range communication, you might want to look for a version with an external antenna connector. Otherwise, solid hardware.
Anonymous
Mar 14, 2026
Rating: 4/5
Great value, minor pin labeling issue
The performance is excellent for the price. The RISC-V core handles my sensor data logging without issues. Only downside is the pin labels are a bit small to read without a magnifier.
Anonymous
Mar 02, 2026
Rating: 5/5
Perfect for compact IoT projects
This SuperMini board is incredibly small yet powerful. The USB-C connection makes programming a breeze, and the Wi-Fi connectivity is stable. Highly recommended for anyone needing a tiny footprint.
Q: How do I enter download mode if the auto-detect fails?
A: To manually enter download mode, hold down the BOOT button while pressing and releasing the RESET button. Then release the BOOT button. The device should now be ready for flashing.
Q: Does it support MicroPython?
A: Absolutely! You can flash MicroPython firmware onto the ESP32-C3. There are many pre-built binaries available online specifically for the C3 architecture.
Q: What is the maximum current this board can supply on the 3.3V pin?
A: The onboard LDO regulator can typically supply up to 300mA-500mA depending on the specific batch and heat dissipation. For high-power peripherals, we recommend using an external power source.
Q: Can I power this board via the VIN pin instead of USB?
A: Yes, you can power the board via the VIN pin. The acceptable input voltage range is typically 3.3V to 5V. Please ensure polarity is correct to avoid damaging the board.
Q: Is this board compatible with the Arduino IDE?
A: Yes, the ESP32-C3 SuperMini is fully compatible with the Arduino IDE. You just need to install the ESP32 board manager package and select the 'Xiao ESP32C3' or generic 'ESP32C3 Dev Module' depending on your specific setup.