Anonymous
Apr 15, 2026
Rating: 5/5
Excellent for wearables
Small footprint makes it ideal for costume electronics. Very bright.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| LED Model | WS2812B 5050 |
| Operating Voltage | 5V DC |
| Control Protocol | Single-wire NRZ |
| Pin Count | 4 Pins |
| Board Dimensions | 10mm x 10mm |
| Color Range | 24-bit RGB |
| PCB Material | FR-4 Glass Epoxy |
| Compatibility | Arduino, ESP32, Raspberry Pi |
| Max Current | 20mA per LED |
| Package Contents | 5 x LED Modules |
Anonymous
Apr 15, 2026
Rating: 5/5
Excellent for wearables
Small footprint makes it ideal for costume electronics. Very bright.
Anonymous
Mar 23, 2026
Rating: 3/5
One defective unit
Out of 5, one had a dead blue channel. Seller replaced it quickly though.
Anonymous
Mar 22, 2026
Rating: 4/5
Good quality but needs level shifter
Great LEDs, but remember to use a logic level shifter if running on 3.3V boards.
Anonymous
Feb 23, 2026
Rating: 5/5
Fast Shipping
Arrived quickly and well packaged. All LEDs tested working.
Anonymous
Feb 10, 2026
Rating: 5/5
Perfect for Arduino Projects
Works flawlessly with the FastLED library. Bright colors and easy to solder.
Q: Can I chain multiple boards together?
A: Yes, connect the DOUT of one board to the DIN of the next.
Q: Is this waterproof?
A: No, this is a bare PCB module. You will need to enclose it for outdoor use.
Q: Can I run this directly from a 3.3V pin?
A: While it might work, we recommend a 5V power supply and a logic level shifter for stability.
Q: Which library do you recommend?
A: The Adafruit NeoPixel library or FastLED are both excellent choices.
Q: What is the maximum chain length?
A: Depends on power supply, but data signal can degrade after many units. Use a capacitor near the first LED.